- scrc.us.com
- Compare
- Guider 2s vs mCreate 2.0
Flashforge Guider 2s vs Makeblock mCreate 2.0
What Guider 2s does better (3) and where mCreate 2.0 wins (1) — every spec side by side.
vs
3.2Speed4.1
8.1Build volume6.4
Dimensions
Size comparison
Guider 2smCreate 2.0
| Guider 2s | mCreate 2.0 | Difference | |
|---|---|---|---|
| Height | 560 mm | 485 mm | +75 mm |
| Width | 550 mm | 445 mm | +105 mm |
| Depth | 490 mm | 550 mm | −60 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Guider 2s better than mCreate 2.0?
- Build volume21 L vs 14.3 L+47%
- Build width (X)280 mm vs 220 mm+27%
- Build depth (Y)250 mm vs 220 mm+14%
Why is mCreate 2.0 better than Guider 2s?
- Max print speed100 mm/s vs 150 mm/s+50%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 280 mm | 220 mm |
| Build depth (Y) | 250 mm | 220 mm |
| Build height (Z) | 300 mm | 295 mm |
| Build volume | 21 L | 14.3 L |
| Speed | ||
| Max print speed | 100 mm/s | 150 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.4 mm | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | — | PLA, TPU, PVA |
| Number of supported materials | — | 3 |
| Engineering materials (PA, PC, CF) | — | No |
| Print bed | ||
| Heated bed | Yes | — |
| Max bed temperature | 120 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | — |
| Wi-Fi | Yes | — |
| Ethernet | Yes | — |
| USB | Yes | — |
| Touchscreen | — | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 550 mm | 445 mm |
| Depth | 490 mm | 550 mm |
| Height | 560 mm | 485 mm |
| Weight | 30 kg | — |
