- scrc.us.com
- Compare
- CR-30 Printmill Belt vs Guider 2s
Creality CR-30 Printmill Belt vs Flashforge Guider 2s
What CR-30 Printmill Belt does better (1) and where Guider 2s wins (2) — every spec side by side.
vs
Dimensions
Size comparison
CR-30 Printmill BeltGuider 2s
| CR-30 Printmill Belt | Guider 2s | Difference | |
|---|---|---|---|
| Height | 410 mm | 560 mm | −150 mm |
| Width | 535 mm | 550 mm | −15 mm |
| Depth | 656 mm | 490 mm | +166 mm |
| Weight | 16.5 kg | 30 kg | −13.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-30 Printmill Belt better than Guider 2s?
- Weight16.5 kg vs 30 kg+82%
Why is Guider 2s better than CR-30 Printmill Belt?
- Wi-FiNo · CR-30 Printmill Belt: Yes
- EthernetNo · CR-30 Printmill Belt: Yes
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | — | 280 mm |
| Build depth (Y) | — | 250 mm |
| Build height (Z) | — | 300 mm |
| Build volume | — | 21 L |
| Speed | ||
| Max print speed | — | 100 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | — | 300 °C |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, TPU, PETG | — |
| Number of supported materials | 3 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 120 °C |
| Connectivity & control | ||
| Connectivity | USB, SD card | Wi-Fi, Ethernet, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | Yes | — |
| Bluetooth | No | — |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 535 mm | 550 mm |
| Depth | 656 mm | 490 mm |
| Height | 410 mm | 560 mm |
| Weight | 16.5 kg | 30 kg |
| Rated power | 350 W | — |
