- scrc.us.com
- Compare
- Guider 2s vs i3 MK3S
Flashforge Guider 2s vs Prusa i3 MK3S
What Guider 2s does better (7) and where i3 MK3S wins (1) — every spec side by side.
Dimensions
Size comparison
Guider 2si3 MK3S
| Guider 2s | i3 MK3S | Difference | |
|---|---|---|---|
| Height | 560 mm | 500 mm | +60 mm |
| Width | 550 mm | 550 mm | = |
| Depth | 490 mm | 400 mm | +90 mm |
| Weight | 30 kg | 11 kg | +19 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Guider 2s better than i3 MK3S?
- Build volume21 L vs 11 L+91%
- Wi-FiYes · i3 MK3S: No
- Build height (Z)300 mm vs 210 mm+43%
- Delivered asFully assembled vs Kit
- EthernetYes · i3 MK3S: No
- Build depth (Y)250 mm vs 210 mm+19%
- Build width (X)280 mm vs 250 mm+12%
Why is i3 MK3S better than Guider 2s?
- Weight30 kg vs 11 kg2.7×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | Kit |
| Build volume | ||
| Build width (X) | 280 mm | 250 mm |
| Build depth (Y) | 250 mm | 210 mm |
| Build height (Z) | 300 mm | 210 mm |
| Build volume | 21 L | 11 L |
| Speed | ||
| Max print speed | 100 mm/s | — |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.4 mm | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Print bed | ||
| Heated bed | Yes | — |
| Max bed temperature | 120 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | SD card |
| Wi-Fi | Yes | No |
| Ethernet | Yes | No |
| USB | Yes | No |
| SD card | — | Yes |
| Bluetooth | — | No |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 550 mm | 550 mm |
| Depth | 490 mm | 400 mm |
| Height | 560 mm | 500 mm |
| Weight | 30 kg | 11 kg |
