- scrc.us.com
- Compare
- Creator 4A vs Pro2 Plus
Flashforge Creator 4A vs Raise3D Pro2 Plus
What Creator 4A does better (8) and where Pro2 Plus wins (3) — every spec side by side.
vs
5.9Speed3.6
9.2Print quality9.7
7.7Material versatility2.1
9.2Build volume8.6
9.4Ease of use7.8
Dimensions
Size comparison
Creator 4APro2 Plus
| Creator 4A | Pro2 Plus | Difference | |
|---|---|---|---|
| Height | 1,000 mm | 1,105 mm | −105 mm |
| Width | 840 mm | 620 mm | +220 mm |
| Depth | 675 mm | 590 mm | +85 mm |
| Weight | 90 kg | 59.3 kg | +30.7 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator 4A better than Pro2 Plus?
- Build volume70 L vs 56.3 L+24%
- Engineering materials (PA, PC, CF)Yes · Pro2 Plus: No
- Max print speed200 mm/s vs 150 mm/s+33%
- Max nozzle temperature320 °C vs 300 °C+7%
- Max bed temperature130 °C vs 110 °C+18%
- Number of supported materials8 vs 5+60%
- Build width (X)400 mm vs 305 mm+31%
- Build depth (Y)350 mm vs 305 mm+15%
Why is Pro2 Plus better than Creator 4A?
- Finest layer height0.015 mm vs 0.01 mm+50%
- Build height (Z)500 mm vs 605 mm+21%
- Weight90 kg vs 59.3 kg+52%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 400 mm | 305 mm |
| Build depth (Y) | 350 mm | 305 mm |
| Build height (Z) | 500 mm | 605 mm |
| Build volume | 70 L | 56.3 L |
| Speed | ||
| Max print speed | 200 mm/s | 150 mm/s |
| Print quality | ||
| Finest layer height | 0.015 mm | 0.01 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 320 °C | 300 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6, 0.8 | — |
| Toolheads | 2 | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, ASA, PA, PC, PETG, PLA, PP, TPU | PLA, ABS, HIPS, TPU, PETG |
| Number of supported materials | 8 | 5 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 2 | — |
| Multi-colour system | IDEX | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 130 °C | 110 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Cloud printing | Yes | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | — |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 840 mm | 620 mm |
| Depth | 675 mm | 590 mm |
| Height | 1,000 mm | 1,105 mm |
| Weight | 90 kg | 59.3 kg |
| Rated power | 2,320 W | 600 W |
| Noise level | — | 50 dB |
