- scrc.us.com
- Compare
- Max4 vs X-PLUS 3
QIDI Max4 vs QIDI X-PLUS 3
What Max4 does better (6) and where X-PLUS 3 wins (2) — every spec side by side.
Dimensions
Size comparison
Max4X-PLUS 3
| Max4 | X-PLUS 3 | Difference | |
|---|---|---|---|
| Height | 612 mm | 529 mm | +83 mm |
| Width | 558 mm | 511 mm | +47 mm |
| Depth | 578 mm | 527 mm | +51 mm |
| Weight | 40 kg | 19.5 kg | +20.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Max4 better than X-PLUS 3?
- Build volume51.7 L vs 21.2 L2.4×
- Max print speed800 mm/s vs 600 mm/s+33%
- Max nozzle temperature370 °C vs 350 °C+6%
- Build height (Z)340 mm vs 270 mm+26%
- Build width (X)390 mm vs 280 mm+39%
- Build depth (Y)390 mm vs 280 mm+39%
Why is X-PLUS 3 better than Max4?
- Weight40 kg vs 19.5 kg2.1×
- Number of supported materials8 vs 14+75%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | — |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 390 mm | 280 mm |
| Build depth (Y) | 390 mm | 280 mm |
| Build height (Z) | 340 mm | 270 mm |
| Build volume | 51.7 L | 21.2 L |
| Speed | ||
| Max print speed | 800 mm/s | 600 mm/s |
| Max acceleration | 30,000 mm/s² | — |
| Max volumetric flow | — | 35 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | — |
| Thickest layer height | 0.4 mm | — |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 370 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | — | hardened steel |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | — |
| Nozzles | 1 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, ASA, PA, PA-CF, PC, PETG, PLA, TPU | PET-CF, PA12-CF, compatible: PLA, ABS, TPU, ASA, PETG, PET-CF, PA12-CF, PC, UltraPA, Nylon, Carbon Fiber, etc. |
| Number of supported materials | 8 | 14 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 4 | — |
| Multi-colour system | QIDI Box | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 120 °C |
| Flexible magnetic build plate | Yes | — |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | — | 65 °C |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 5″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Silent stepper drivers | Yes | — |
| Size & power | ||
| Width | 558 mm | 511 mm |
| Depth | 578 mm | 527 mm |
| Height | 612 mm | 529 mm |
| Weight | 40 kg | 19.5 kg |
| Rated power | 700 W | 800 W |
