- scrc.us.com
- Compare
- Guider 3 Ultra vs XL+
Flashforge Guider 3 Ultra vs Prusa XL+
What Guider 3 Ultra does better (4) and where XL+ wins (4) — every spec side by side.
vs
5.9Print quality5.9
6.1Material versatility4.3
8.8Build volume7.7
9.0Ease of use3.2
Dimensions
Size comparison
Guider 3 UltraXL+
| Guider 3 Ultra | XL+ | Difference | |
|---|---|---|---|
| Height | 1,070 mm | 720 mm | +350 mm |
| Width | 635 mm | 700 mm | −65 mm |
| Depth | 550 mm | 900 mm | −350 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Guider 3 Ultra better than XL+?
- Build volume65.3 L vs 46.7 L+40%
- Build height (Z)600 mm vs 360 mm+67%
- Max nozzle temperature350 °C vs 290 °C+21%
- Screen size7″ vs 3.5″2×
Why is XL+ better than Guider 3 Ultra?
- Engineering materials (PA, PC, CF)No · Guider 3 Ultra: Yes
- Number of supported materials4 vs 92.2×
- Build width (X)330 mm vs 360 mm+9%
- Build depth (Y)330 mm vs 360 mm+9%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 330 mm | 360 mm |
| Build depth (Y) | 330 mm | 360 mm |
| Build height (Z) | 600 mm | 360 mm |
| Build volume | 65.3 L | 46.7 L |
| Speed | ||
| Max print speed | 250 mm/s | — |
| Max acceleration | 20,000 mm/s² | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Thickest layer height | 0.4 mm | — |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 290 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.8 | — |
| Toolheads | — | 5 |
| Nozzles | 2 | — |
| Filament diameter | — | 1.75 mm |
| Supported materials | PLA, PETG, ASA, ABS | PLA, PETG, Flex, PVA, PC, PP, CPE, ASA, HIPS |
| Number of supported materials | 4 | 9 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 5 |
| Multi-colour system | — | toolchanger |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | — | No |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Ethernet, USB, Wi-Fi, NFC |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| NFC (filament / setup) | — | Yes |
| App control | — | Yes |
| Screen size | 7″ | 3.5″ |
| Touchscreen | Yes | — |
| Features | ||
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 635 mm | 700 mm |
| Depth | 550 mm | 900 mm |
| Height | 1,070 mm | 720 mm |
| Weight | — | 27.9 kg |
| Rated power | — | 120 W |
