- scrc.us.com
- Compare
- F430 vs Guider 3 Ultra
CreatBot F430 vs Flashforge Guider 3 Ultra
What F430 does better (6) and where Guider 3 Ultra wins (5) — every spec side by side.
vs
4.6Speed7.2
8.2Print quality5.9
8.8Material versatility6.1
7.2Build volume8.8
3.7Ease of use9.0
Dimensions
Size comparison
F430Guider 3 Ultra
| F430 | Guider 3 Ultra | Difference | |
|---|---|---|---|
| Height | 680 mm | 1,070 mm | −390 mm |
| Width | 620 mm | 635 mm | −15 mm |
| Depth | 485 mm | 550 mm | −65 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is F430 better than Guider 3 Ultra?
- Engineering materials (PA, PC, CF)Yes · Guider 3 Ultra: No
- Max nozzle temperature420 °C vs 350 °C+20%
- Number of supported materials17 vs 44.2×
- Finest layer height0.04 mm vs 0.05 mm+25%
- Max bed temperature140 °C vs 120 °C+17%
- Build width (X)400 mm vs 330 mm+21%
Why is Guider 3 Ultra better than F430?
- Build volume36 L vs 65.3 L+81%
- Build height (Z)300 mm vs 600 mm2×
- Max print speed180 mm/s vs 250 mm/s+39%
- Screen size4.3″ vs 7″+63%
- Build depth (Y)300 mm vs 330 mm+10%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 400 mm | 330 mm |
| Build depth (Y) | 300 mm | 330 mm |
| Build height (Z) | 300 mm | 600 mm |
| Build volume | 36 L | 65.3 L |
| Speed | ||
| Max print speed | 180 mm/s | 250 mm/s |
| Max acceleration | — | 20,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.04 mm | 0.05 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PETG, HIPS, PP, Flexible, TPU, PVA, UltraPA, PA-CF, PA-GF, ASA, PVDF | PLA, PETG, ASA, ABS |
| Number of supported materials | 17 | 4 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 140 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 620 mm | 635 mm |
| Depth | 485 mm | 550 mm |
| Height | 680 mm | 1,070 mm |
| Weight | 48 kg | — |
| Rated power | 2,700 W | — |
