- scrc.us.com
- Compare
- Sermoon D3 vs Super Racer SR
Creality Sermoon D3 vs FLSUN Super Racer SR
What Sermoon D3 does better (9) and where Super Racer SR wins (3) — every spec side by side.
vs
7.0Speed5.3
3.9Print quality5.5
7.0Material versatility2.6
8.2Build volume7.2
8.7Ease of use3.0
Dimensions
Size comparison
Sermoon D3Super Racer SR
| Sermoon D3 | Super Racer SR | Difference | |
|---|---|---|---|
| Height | 656 mm | 960 mm | −304 mm |
| Width | 553 mm | 440 mm | +113 mm |
| Depth | 578 mm | 390 mm | +188 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 better than Super Racer SR?
- Build volume22.5 L vs 17.5 L+29%
- Direct-drive extruderYes · Super Racer SR: No
- Built-in cameraYes · Super Racer SR: No
- Max print speed250 mm/s vs 200 mm/s+25%
- Max nozzle temperature300 °C vs 260 °C+15%
- Delivered asFully assembled vs Partially assembled
- Max bed temperature110 °C vs 100 °C+10%
- Screen size4.3″ vs 3.5″+23%
- Build width (X)300 mm vs 260 mm+15%
Why is Super Racer SR better than Sermoon D3?
- Finest layer height0.1 mm vs 0.05 mm2×
- Build height (Z)300 mm vs 330 mm+10%
- Build depth (Y)250 mm vs 260 mm+4%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | Fully assembled | Partially assembled |
| All-metal frame | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 260 mm |
| Build depth (Y) | 250 mm | 260 mm |
| Build height (Z) | 300 mm | 330 mm |
| Build volume | 22.5 L | 17.5 L |
| Speed | ||
| Max print speed | 250 mm/s | 200 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | 0.4 mm | 0.3 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 260 °C |
| Direct-drive extruder | Yes | No |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | — | brass |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, PET, PETG | ABS, PETG, PLA, Wood |
| Number of supported materials | 4 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet | USB, SD card |
| Wi-Fi | Yes | — |
| Ethernet | Yes | — |
| USB | No | Yes |
| SD card | No | Yes |
| Bluetooth | No | — |
| Screen size | 4.3″ | 3.5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | No |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 553 mm | 440 mm |
| Depth | 578 mm | 390 mm |
| Height | 656 mm | 960 mm |
| Weight | 45 kg | — |
| Rated power | 500 W | 300 W |
