- scrc.us.com
- Compare
- Arco vs SV08 Max
Phrozen Arco vs Sovol SV08 Max
What Arco does better (3) and where SV08 Max wins (6) — every spec side by side.
Dimensions
Size comparison
ArcoSV08 Max
| Arco | SV08 Max | Difference | |
|---|---|---|---|
| Height | 620 mm | 750 mm | −130 mm |
| Width | 491 mm | 700 mm | −209 mm |
| Depth | 475 mm | 710 mm | −235 mm |
| Weight | 22 kg | 21.5 kg | +0.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Arco better than SV08 Max?
- Max print speed1,000 mm/s vs 700 mm/s+43%
- TouchscreenYes · SV08 Max: No
- Max bed temperature120 °C vs 100 °C+20%
Why is SV08 Max better than Arco?
- Build volume27 L vs 125 L4.6×
- Engineering materials (PA, PC, CF)No · Arco: Yes
- Build height (Z)300 mm vs 500 mm+67%
- Build width (X)300 mm vs 500 mm+67%
- Build depth (Y)300 mm vs 500 mm+67%
- Weight22 kg vs 21.5 kg+2%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Kit |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 500 mm |
| Build depth (Y) | 300 mm | 500 mm |
| Build height (Z) | 300 mm | 500 mm |
| Build volume | 27 L | 125 L |
| Speed | ||
| Max print speed | 1,000 mm/s | 700 mm/s |
| Max acceleration | 40,000 mm/s² | 40,000 mm/s² |
| Max volumetric flow | 50 mm³/s | 50 mm³/s |
| Print quality | ||
| Finest layer height | — | 0.08 mm |
| Thickest layer height | — | 0.36 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | — | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | — | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PETG, TPU, PET CF15, etc. | ABS, ASA, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 7 | 7 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | No | — |
| Actively heated chamber | — | No |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 5″ | — |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 491 mm | 700 mm |
| Depth | 475 mm | 710 mm |
| Height | 620 mm | 750 mm |
| Weight | 22 kg | 21.5 kg |
| Rated power | 1,700 W | — |
