- scrc.us.com
- Compare
- Funmat Pro 310 vs Pro3 Plus HS
INTAMSYS Funmat Pro 310 vs Raise3D Pro3 Plus HS
What Funmat Pro 310 does better (5) and where Pro3 Plus HS wins (4) — every spec side by side.
vs
6.7Speed9.6
3.3Print quality5.9
8.6Material versatility5.2
4.5Build volume8.0
5.8Ease of use3.4
Dimensions
Size comparison
Funmat Pro 310Pro3 Plus HS
| Funmat Pro 310 | Pro3 Plus HS | Difference | |
|---|---|---|---|
| Height | 700 mm | 1,105 mm | −405 mm |
| Width | 700 mm | 620 mm | +80 mm |
| Depth | 655 mm | 626 mm | +29 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Funmat Pro 310 better than Pro3 Plus HS?
- Engineering materials (PA, PC, CF)Yes · Pro3 Plus HS: No
- Max nozzle temperature350 °C vs 320 °C+9%
- Max bed temperature160 °C vs 120 °C+33%
- Build width (X)305 mm vs 255 mm+20%
- Number of supported materials7 vs 6+17%
Why is Pro3 Plus HS better than Funmat Pro 310?
- Build volume20.6 L vs 46.3 L2.2×
- Build height (Z)260 mm vs 605 mm2.3×
- Finest layer height0.1 mm vs 0.05 mm2×
- Build depth (Y)260 mm vs 300 mm+15%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 305 mm | 255 mm |
| Build depth (Y) | 260 mm | 300 mm |
| Build height (Z) | 260 mm | 605 mm |
| Build volume | 20.6 L | 46.3 L |
| Speed | ||
| Max print speed | 500 mm/s | 500 mm/s |
| Max acceleration | 10,000 mm/s² | — |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | — | 0.6 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 320 °C |
| Default nozzle | — | 0.4 mm |
| Toolheads | — | 2 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PC, ABS-HS, PPA-CF, GF, PA, PPS, support materials | PLA, ABS, HIPS, TPU, PETG, ASA |
| Number of supported materials | 7 | 6 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Multi-colour system | — | IDEX |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 160 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 100 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | — | 7″ |
| Touchscreen | — | No |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 700 mm | 620 mm |
| Depth | 655 mm | 626 mm |
| Height | 700 mm | 1,105 mm |
| Weight | — | 64 kg |
| Rated power | 1,500 W | 600 W |
| Noise level | — | 55 dB |
