- scrc.us.com
- Compare
- Sermoon D3 Pro vs Funmat Pro 310
Creality Sermoon D3 Pro vs INTAMSYS Funmat Pro 310
What Sermoon D3 Pro does better (1) and where Funmat Pro 310 wins (8) — every spec side by side.
vs
7.8Speed6.7
3.8Print quality3.3
4.6Material versatility8.6
4.2Build volume4.5
5.2Ease of use5.8
Dimensions
Size comparison
Sermoon D3 ProFunmat Pro 310
| Sermoon D3 Pro | Funmat Pro 310 | Difference | |
|---|---|---|---|
| Height | 656 mm | 700 mm | −44 mm |
| Width | 553 mm | 700 mm | −147 mm |
| Depth | 578 mm | 655 mm | −77 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than Funmat Pro 310?
- Build height (Z)300 mm vs 260 mm+15%
Why is Funmat Pro 310 better than Sermoon D3 Pro?
- Max print speed300 mm/s vs 500 mm/s+67%
- Engineering materials (PA, PC, CF)No · Sermoon D3 Pro: Yes
- Build volume19.1 L vs 20.6 L+8%
- Max nozzle temperature300 °C vs 350 °C+17%
- Max bed temperature120 °C vs 160 °C+33%
- Max chamber temperature60 °C vs 100 °C+67%
- Build depth (Y)220 mm vs 260 mm+18%
- Build width (X)290 mm vs 305 mm+5%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 290 mm | 305 mm |
| Build depth (Y) | 220 mm | 260 mm |
| Build height (Z) | 300 mm | 260 mm |
| Build volume | 19.1 L | 20.6 L |
| Speed | ||
| Max print speed | 300 mm/s | 500 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.1 mm |
| Thickest layer height | 0.35 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | — |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | PC, ABS-HS, PPA-CF, GF, PA, PPS, support materials |
| Number of supported materials | 7 | 7 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 160 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 60 °C | 100 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 700 mm |
| Depth | 578 mm | 655 mm |
| Height | 656 mm | 700 mm |
| Weight | 43 kg | — |
| Rated power | 1,300 W | 1,500 W |
