- scrc.us.com
- Compare
- Sermoon D3 Pro vs E2 CF
Creality Sermoon D3 Pro vs Raise3D E2 CF
What Sermoon D3 Pro does better (4) and where E2 CF wins (3) — every spec side by side.
vs
7.8Speed3.6
3.8Print quality3.3
4.6Material versatility2.9
4.2Build volume3.7
5.2Ease of use6.8
Dimensions
Size comparison
Sermoon D3 ProE2 CF
| Sermoon D3 Pro | E2 CF | Difference | |
|---|---|---|---|
| Height | 656 mm | 465 mm | +191 mm |
| Width | 553 mm | 596 mm | −43 mm |
| Depth | 578 mm | 607 mm | −29 mm |
| Weight | 43 kg | 32.4 kg | +10.6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than E2 CF?
- Max print speed300 mm/s vs 150 mm/s2×
- Build height (Z)300 mm vs 240 mm+25%
- Max bed temperature120 °C vs 110 °C+9%
- Number of supported materials7 vs 4+75%
Why is E2 CF better than Sermoon D3 Pro?
- Weight43 kg vs 32.4 kg+33%
- Build width (X)290 mm vs 330 mm+14%
- Build depth (Y)220 mm vs 240 mm+9%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 290 mm | 330 mm |
| Build depth (Y) | 220 mm | 240 mm |
| Build height (Z) | 300 mm | 240 mm |
| Build volume | 19.1 L | 19 L |
| Speed | ||
| Max print speed | 300 mm/s | 150 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.1 mm |
| Thickest layer height | 0.35 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 300 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | ABS, PLA, HIPS, PVA |
| Number of supported materials | 7 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 110 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 60 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | — |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 596 mm |
| Depth | 578 mm | 607 mm |
| Height | 656 mm | 465 mm |
| Weight | 43 kg | 32.4 kg |
| Rated power | 1,300 W | 350 W |
| Noise level | — | 50 dB |
