- scrc.us.com
- Compare
- Creator Pro 2 vs E2
Flashforge Creator Pro 2 vs Raise3D E2
What Creator Pro 2 does better (2) and where E2 wins (8) — every spec side by side.
vs
2.6Speed3.6
2.4Print quality8.5
2.6Material versatility2.9
2.1Build volume3.7
Dimensions
Size comparison
Creator Pro 2E2
| Creator Pro 2 | E2 | Difference | |
|---|---|---|---|
| Height | 403 mm | 465 mm | −62 mm |
| Width | 526 mm | 607 mm | −81 mm |
| Depth | 360 mm | 596 mm | −236 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator Pro 2 better than E2?
- Number of supported materials10 vs 42.5×
- Max bed temperature120 °C vs 110 °C+9%
Why is E2 better than Creator Pro 2?
- Build volume4.4 L vs 19 L4.3×
- Finest layer height0.1 mm vs 0.02 mm5×
- Max print speed100 mm/s vs 150 mm/s+50%
- Max nozzle temperature240 °C vs 300 °C+25%
- Build height (Z)150 mm vs 240 mm+60%
- Noise level55 dB vs 50 dB+10%
- Build width (X)200 mm vs 330 mm+65%
- Build depth (Y)148 mm vs 240 mm+62%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | — |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 200 mm | 330 mm |
| Build depth (Y) | 148 mm | 240 mm |
| Build height (Z) | 150 mm | 240 mm |
| Build volume | 4.4 L | 19 L |
| Speed | ||
| Max print speed | 100 mm/s | 150 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.02 mm |
| Thickest layer height | 0.4 mm | — |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 240 °C | 300 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 2 | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, Flex, HIPS, PET, PETG, PLA, PVA, TPC, TPE, TPU | ABS, PLA, HIPS, PVA |
| Number of supported materials | 10 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 2 | — |
| Multi-colour system | toolchanger | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 110 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | USB, SD card | Wi-Fi, Ethernet, USB |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| SD card | Yes | No |
| Bluetooth | — | No |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 526 mm | 607 mm |
| Depth | 360 mm | 596 mm |
| Height | 403 mm | 465 mm |
| Weight | 14.8 kg | — |
| Rated power | 320 W | 350 W |
| Noise level | 55 dB | 50 dB |
