- scrc.us.com
- Compare
- Peek-300 vs S8
CreatBot Peek-300 vs UltiMaker S8
What Peek-300 does better (8) and where S8 wins (6) — every spec side by side.
Dimensions
Size comparison
Peek-300S8
| Peek-300 | S8 | Difference | |
|---|---|---|---|
| Height | 750 mm | 800 mm | −50 mm |
| Width | 650 mm | 495 mm | +155 mm |
| Depth | 600 mm | 585 mm | +15 mm |
| Weight | 100 kg | 30 kg | +70 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-300 better than S8?
- Build volume36 L vs 23.8 L+51%
- Engineering materials (PA, PC, CF)Yes · S8: No
- Max bed temperature200 °C vs 120 °C+67%
- Finest layer height0.04 mm vs 0.06 mm+50%
- Number of supported materials17 vs 44.2×
- Build height (Z)400 mm vs 300 mm+33%
- TouchscreenYes · S8: No
- Build depth (Y)300 mm vs 240 mm+25%
Why is S8 better than Peek-300?
- Max print speed150 mm/s vs 500 mm/s3.3×
- Wi-FiNo · Peek-300: Yes
- Weight100 kg vs 30 kg3.3×
- EthernetNo · Peek-300: Yes
- Build width (X)300 mm vs 330 mm+10%
- Screen size4.3″ vs 4.7″+9%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 300 mm | 330 mm |
| Build depth (Y) | 300 mm | 240 mm |
| Build height (Z) | 400 mm | 300 mm |
| Build volume | 36 L | 23.8 L |
| Speed | ||
| Max print speed | 150 mm/s | 500 mm/s |
| Print quality | ||
| Finest layer height | 0.04 mm | 0.06 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | — |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Toolheads | — | 1 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 2.85 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK | PLA, PETG, ABS, TPU |
| Number of supported materials | 17 | 4 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 120 °C | — |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | 4.7″ |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | — | No |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 650 mm | 495 mm |
| Depth | 600 mm | 585 mm |
| Height | 750 mm | 800 mm |
| Weight | 100 kg | 30 kg |
| Rated power | 4,600 W | 500 W |
