- scrc.us.com
- Compare
- Peek-300 vs 3DWOX 7X
CreatBot Peek-300 vs Sindoh 3DWOX 7X
What Peek-300 does better (4) and where 3DWOX 7X wins (7) — every spec side by side.
Dimensions
Size comparison
Peek-3003DWOX 7X
| Peek-300 | 3DWOX 7X | Difference | |
|---|---|---|---|
| Height | 750 mm | 1,690 mm | −940 mm |
| Width | 650 mm | 864 mm | −214 mm |
| Depth | 600 mm | 810 mm | −210 mm |
| Weight | 100 kg | 170 kg | −70 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-300 better than 3DWOX 7X?
- Engineering materials (PA, PC, CF)Yes · 3DWOX 7X: No
- Finest layer height0.04 mm vs 0.05 mm+25%
- Number of supported materials17 vs 9+89%
- Weight100 kg vs 170 kg+70%
Why is 3DWOX 7X better than Peek-300?
- Build volume36 L vs 64.9 L+80%
- Wi-FiNo · Peek-300: Yes
- Screen size4.3″ vs 10.1″2.3×
- EthernetNo · Peek-300: Yes
- Build height (Z)400 mm vs 450 mm+12%
- Build depth (Y)300 mm vs 390 mm+30%
- Build width (X)300 mm vs 370 mm+23%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Bed-slinger (i3-style) |
| Build volume | ||
| Build width (X) | 300 mm | 370 mm |
| Build depth (Y) | 300 mm | 390 mm |
| Build height (Z) | 400 mm | 450 mm |
| Build volume | 36 L | 64.9 L |
| Speed | ||
| Max print speed | 150 mm/s | — |
| Print quality | ||
| Finest layer height | 0.04 mm | 0.05 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | — |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK | PLA, ABS, PVA, PETG, TPE, ASA, Metal, Smooth, flexible filaments |
| Number of supported materials | 17 | 9 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Print bed | ||
| Heated bed | Yes | — |
| Max bed temperature | 200 °C | — |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 120 °C | — |
| Air filter (carbon / HEPA) | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | — |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 10.1″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 650 mm | 864 mm |
| Depth | 600 mm | 810 mm |
| Height | 750 mm | 1,690 mm |
| Weight | 100 kg | 170 kg |
| Rated power | 4,600 W | — |
