- scrc.us.com
- Compare
- Peek-300 vs Creator 4A
CreatBot Peek-300 vs Flashforge Creator 4A
What Peek-300 does better (3) and where Creator 4A wins (10) — every spec side by side.
vs
3.6Speed5.9
8.2Print quality9.2
9.5Material versatility7.7
7.4Build volume9.2
2.6Ease of use9.4
Dimensions
Size comparison
Peek-300Creator 4A
| Peek-300 | Creator 4A | Difference | |
|---|---|---|---|
| Height | 750 mm | 1,000 mm | −250 mm |
| Width | 650 mm | 840 mm | −190 mm |
| Depth | 600 mm | 675 mm | −75 mm |
| Weight | 100 kg | 90 kg | +10 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-300 better than Creator 4A?
- Max nozzle temperature480 °C vs 320 °C+50%
- Max bed temperature200 °C vs 130 °C+54%
- Number of supported materials17 vs 82.1×
Why is Creator 4A better than Peek-300?
- Build volume36 L vs 70 L+94%
- Finest layer height0.04 mm vs 0.015 mm2.7×
- Wi-FiNo · Peek-300: Yes
- Max print speed150 mm/s vs 200 mm/s+33%
- Build height (Z)400 mm vs 500 mm+25%
- EthernetNo · Peek-300: Yes
- Screen size4.3″ vs 7″+63%
- Build width (X)300 mm vs 400 mm+33%
- Build depth (Y)300 mm vs 350 mm+17%
- Weight100 kg vs 90 kg+11%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 300 mm | 400 mm |
| Build depth (Y) | 300 mm | 350 mm |
| Build height (Z) | 400 mm | 500 mm |
| Build volume | 36 L | 70 L |
| Speed | ||
| Max print speed | 150 mm/s | 200 mm/s |
| Print quality | ||
| Finest layer height | 0.04 mm | 0.015 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 320 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.6, 0.8 |
| Toolheads | — | 2 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK | ABS, ASA, PA, PC, PETG, PLA, PP, TPU |
| Number of supported materials | 17 | 8 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Multi-colour system | — | IDEX |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 130 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 120 °C | — |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Cloud printing | — | Yes |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 650 mm | 840 mm |
| Depth | 600 mm | 675 mm |
| Height | 750 mm | 1,000 mm |
| Weight | 100 kg | 90 kg |
| Rated power | 4,600 W | 2,320 W |
