- scrc.us.com
- Compare
- Peek-250 vs Enhanced FUNMAT HT
CreatBot Peek-250 vs INTAMSYS Enhanced FUNMAT HT
What Peek-250 does better (6) and where Enhanced FUNMAT HT wins (4) — every spec side by side.
vs
4.6Speed7.8
9.6Material versatility9.5
7.3Build volume6.8
Dimensions
Size comparison
Peek-250Enhanced FUNMAT HT
| Peek-250 | Enhanced FUNMAT HT | Difference | |
|---|---|---|---|
| Height | 815 mm | 530 mm | +285 mm |
| Width | 630 mm | 530 mm | +100 mm |
| Depth | 555 mm | 500 mm | +55 mm |
| Weight | 100 kg | 75.8 kg | +24.2 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than Enhanced FUNMAT HT?
- Build volume18.8 L vs 17.6 L+7%
- Number of supported materials16 vs 28×
- Max nozzle temperature480 °C vs 450 °C+7%
- Max chamber temperature200 °C vs 90 °C2.2×
- Max bed temperature200 °C vs 160 °C+25%
- Build height (Z)300 mm vs 260 mm+15%
Why is Enhanced FUNMAT HT better than Peek-250?
- Max print speed180 mm/s vs 300 mm/s+67%
- Weight100 kg vs 75.8 kg+32%
- Build width (X)250 mm vs 260 mm+4%
- Build depth (Y)250 mm vs 260 mm+4%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 250 mm | 260 mm |
| Build depth (Y) | 250 mm | 260 mm |
| Build height (Z) | 300 mm | 260 mm |
| Build volume | 18.8 L | 17.6 L |
| Speed | ||
| Max print speed | 180 mm/s | 300 mm/s |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 450 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | — |
| Supported nozzle sizes (mm) | 0.4, 0.6 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | ABS, Nylon |
| Number of supported materials | 16 | 2 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 160 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 200 °C | 90 °C |
| Connectivity & control | ||
| Connectivity | USB | — |
| USB | Yes | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 630 mm | 530 mm |
| Depth | 555 mm | 500 mm |
| Height | 815 mm | 530 mm |
| Weight | 100 kg | 75.8 kg |
| Rated power | 2,500 W | — |
