- scrc.us.com
- Compare
- Peek-250 vs Element HT
CreatBot Peek-250 vs Mosaic Element HT
What Peek-250 does better (5) and where Element HT wins (6) — every spec side by side.
vs
4.6Speed3.1
9.6Material versatility9.1
7.3Build volume9.6
Dimensions
Size comparison
Peek-250Element HT
| Peek-250 | Element HT | Difference | |
|---|---|---|---|
| Height | 815 mm | 633 mm | +182 mm |
| Width | 630 mm | 911 mm | −281 mm |
| Depth | 555 mm | 613 mm | −58 mm |
| Weight | 100 kg | 43 kg | +57 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than Element HT?
- Max print speed180 mm/s vs 100 mm/s+80%
- Max bed temperature200 °C vs 120 °C+67%
- Max chamber temperature200 °C vs 80 °C2.5×
- Screen size7″ vs 5″+40%
- Number of supported materials16 vs 12+33%
Why is Element HT better than Peek-250?
- Build volume18.8 L vs 44.7 L2.4×
- Weight100 kg vs 43 kg2.3×
- Max nozzle temperature480 °C vs 500 °C+4%
- Build height (Z)300 mm vs 355 mm+18%
- Build width (X)250 mm vs 355 mm+42%
- Build depth (Y)250 mm vs 355 mm+42%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 250 mm | 355 mm |
| Build depth (Y) | 250 mm | 355 mm |
| Build height (Z) | 300 mm | 355 mm |
| Build volume | 18.8 L | 44.7 L |
| Speed | ||
| Max print speed | 180 mm/s | 100 mm/s |
| Print quality | ||
| Finest layer height | — | 0.02 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 500 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6 | — |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | Mosaic PLA, Mosaic PETG, Mosaic Origin, Mosaic Matrix, Dissolve LT, Mosaic ABS, Mosaic ASA, Mosaic PEEK, Mosaic PEKK, Mosaic Ultem 9085, Mosaic ESD, TPE not supported |
| Number of supported materials | 16 | 12 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 200 °C | 80 °C |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| Screen size | 7″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 630 mm | 911 mm |
| Depth | 555 mm | 613 mm |
| Height | 815 mm | 633 mm |
| Weight | 100 kg | 43 kg |
| Rated power | 2,500 W | — |
