- scrc.us.com
- Compare
- D600 Pro 2 vs Funmat Pro 310
CreatBot D600 Pro 2 vs INTAMSYS Funmat Pro 310
What D600 Pro 2 does better (6) and where Funmat Pro 310 wins (6) — every spec side by side.
vs
4.9Speed6.7
5.9Print quality3.3
6.4Material versatility8.6
9.6Build volume4.5
8.4Ease of use5.8
Dimensions
Size comparison
D600 Pro 2Funmat Pro 310
| D600 Pro 2 | Funmat Pro 310 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 700 mm | +545 mm |
| Width | 1,080 mm | 700 mm | +380 mm |
| Depth | 920 mm | 655 mm | +265 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than Funmat Pro 310?
- Build volume216 L vs 20.6 L10.5×
- Build height (Z)600 mm vs 260 mm2.3×
- Finest layer height0.05 mm vs 0.1 mm2×
- Max nozzle temperature420 °C vs 350 °C+20%
- Build depth (Y)600 mm vs 260 mm2.3×
- Build width (X)600 mm vs 305 mm+97%
Why is Funmat Pro 310 better than D600 Pro 2?
- Max print speed80 mm/s vs 500 mm/s6.2×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Max bed temperature100 °C vs 160 °C+60%
- EthernetNo · D600 Pro 2: Yes
- Max chamber temperature70 °C vs 100 °C+43%
- Number of supported materials5 vs 7+40%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 305 mm |
| Build depth (Y) | 600 mm | 260 mm |
| Build height (Z) | 600 mm | 260 mm |
| Build volume | 216 L | 20.6 L |
| Speed | ||
| Max print speed | 80 mm/s | 500 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 350 °C |
| Default nozzle | 0.6 mm | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | PC, ABS-HS, PPA-CF, GF, PA, PPS, support materials |
| Number of supported materials | 5 | 7 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 160 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 70 °C | 100 °C |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 1,080 mm | 700 mm |
| Depth | 920 mm | 655 mm |
| Height | 1,245 mm | 700 mm |
| Weight | 200 kg | — |
| Rated power | 5,500 W | 1,500 W |
