- scrc.us.com
- Compare
- D600 Pro 2 vs S1
CreatBot D600 Pro 2 vs FLSUN S1
What D600 Pro 2 does better (7) and where S1 wins (6) — every spec side by side.
vs
4.9Speed9.7
5.9Print quality5.2
6.4Material versatility7.6
9.6Build volume2.8
8.4Ease of use8.8
Dimensions
Size comparison
D600 Pro 2S1
| D600 Pro 2 | S1 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 1,030 mm | +215 mm |
| Width | 1,080 mm | 550 mm | +530 mm |
| Depth | 920 mm | 595 mm | +325 mm |
| Weight | 200 kg | 39 kg | +161 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than S1?
- Build volume216 L vs 34.6 L6.2×
- Finest layer height0.05 mm vs 0.1 mm2×
- Nozzles2 vs 12×
- Max nozzle temperature420 °C vs 350 °C+20%
- Build height (Z)600 mm vs 430 mm+40%
- Build width (X)600 mm vs 320 mm+88%
- Build depth (Y)600 mm vs 320 mm+88%
Why is S1 better than D600 Pro 2?
- Max print speed80 mm/s vs 1,200 mm/s15×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Weight200 kg vs 39 kg5.1×
- Max volumetric flow90 mm³/s vs 110 mm³/s+22%
- Number of supported materials5 vs 102×
- Max bed temperature100 °C vs 120 °C+20%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | — | Partially assembled |
| All-metal frame | — | Yes |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 320 mm |
| Build depth (Y) | 600 mm | 320 mm |
| Build height (Z) | 600 mm | 430 mm |
| Build volume | 216 L | 34.6 L |
| Speed | ||
| Max print speed | 80 mm/s | 1,200 mm/s |
| Max volumetric flow | 90 mm³/s | 110 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | — | 0.35 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 350 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzle material | — | hardened steel |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | 2 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | ABS, ASA, Carbon, PA, PC, PETG, PLA, PVA, TPU, Wood |
| Number of supported materials | 5 | 10 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Flexible magnetic build plate | — | Yes |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | — |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Camera resolution | — | 2.1 MP |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | — | Yes |
| Built-in filament drying | — | Yes |
| Size & power | ||
| Width | 1,080 mm | 550 mm |
| Depth | 920 mm | 595 mm |
| Height | 1,245 mm | 1,030 mm |
| Weight | 200 kg | 39 kg |
| Rated power | 5,500 W | 1,300 W |
