- scrc.us.com
- Compare
- Sermoon D3 vs X-PLUS 3
Creality Sermoon D3 vs QIDI X-PLUS 3
What Sermoon D3 does better (3) and where X-PLUS 3 wins (8) — every spec side by side.
vs
7.0Speed9.0
7.0Material versatility8.6
8.2Build volume7.6
8.7Ease of use9.2
Dimensions
Size comparison
Sermoon D3X-PLUS 3
| Sermoon D3 | X-PLUS 3 | Difference | |
|---|---|---|---|
| Height | 656 mm | 529 mm | +127 mm |
| Width | 553 mm | 511 mm | +42 mm |
| Depth | 578 mm | 527 mm | +51 mm |
| Weight | 45 kg | 19.5 kg | +25.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 better than X-PLUS 3?
- Build volume22.5 L vs 21.2 L+6%
- Build height (Z)300 mm vs 270 mm+11%
- Build width (X)300 mm vs 280 mm+7%
Why is X-PLUS 3 better than Sermoon D3?
- Max print speed250 mm/s vs 600 mm/s2.4×
- Engineering materials (PA, PC, CF)No · Sermoon D3: Yes
- Max nozzle temperature300 °C vs 350 °C+17%
- Number of supported materials4 vs 143.5×
- Weight45 kg vs 19.5 kg2.3×
- Max bed temperature110 °C vs 120 °C+9%
- Screen size4.3″ vs 5″+16%
- Build depth (Y)250 mm vs 280 mm+12%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 280 mm |
| Build depth (Y) | 250 mm | 280 mm |
| Build height (Z) | 300 mm | 270 mm |
| Build volume | 22.5 L | 21.2 L |
| Speed | ||
| Max print speed | 250 mm/s | 600 mm/s |
| Max volumetric flow | — | 35 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.4 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | — | hardened steel |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, PET, PETG | PET-CF, PA12-CF, compatible: PLA, ABS, TPU, ASA, PETG, PET-CF, PA12-CF, PC, UltraPA, Nylon, Carbon Fiber, etc. |
| Number of supported materials | 4 | 14 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | — | Yes |
| Max chamber temperature | — | 65 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | No | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | — | Yes |
| Size & power | ||
| Width | 553 mm | 511 mm |
| Depth | 578 mm | 527 mm |
| Height | 656 mm | 529 mm |
| Weight | 45 kg | 19.5 kg |
| Rated power | 500 W | 800 W |
