- scrc.us.com
- Compare
- Flow vs LUGO G3
CraftBot Flow vs LUGOLABS LUGO G3
What Flow does better (5) and where LUGO G3 wins (2) — every spec side by side.
Dimensions
Size comparison
FlowLUGO G3
| Flow | LUGO G3 | Difference | |
|---|---|---|---|
| Height | 540 mm | 532 mm | +8 mm |
| Width | 485 mm | 457 mm | +28 mm |
| Depth | 400 mm | 370 mm | +30 mm |
| Weight | 28 kg | 15 kg | +13 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Flow better than LUGO G3?
- Build volume15 L vs 5.6 L2.7×
- Build height (Z)250 mm vs 180 mm+39%
- Max nozzle temperature300 °C vs 285 °C+5%
- Build width (X)300 mm vs 190 mm+58%
- Build depth (Y)200 mm vs 165 mm+21%
Why is LUGO G3 better than Flow?
- Max bed temperature110 °C vs 130 °C+18%
- Weight28 kg vs 15 kg+87%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 300 mm | 190 mm |
| Build depth (Y) | 200 mm | 165 mm |
| Build height (Z) | 250 mm | 180 mm |
| Build volume | 15 L | 5.6 L |
| Speed | ||
| Max print speed | 200 mm/s | 200 mm/s |
| Print quality | ||
| Finest layer height | 0.05 mm | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 285 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PVA, ABS, HIPS, PET, Nylon | — |
| Number of supported materials | 6 | — |
| Engineering materials (PA, PC, CF) | Yes | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 130 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | — |
| Wi-Fi | Yes | — |
| Ethernet | No | — |
| USB | Yes | — |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 5″ | — |
| Touchscreen | Yes | Yes |
| Size & power | ||
| Width | 485 mm | 457 mm |
| Depth | 400 mm | 370 mm |
| Height | 540 mm | 532 mm |
| Weight | 28 kg | 15 kg |
