- scrc.us.com
- Compare
- SV08 vs SV08 Max
Sovol SV08 vs Sovol SV08 Max
What SV08 does better (1) and where SV08 Max wins (6) — every spec side by side.
Dimensions
Size comparison
SV08SV08 Max
| SV08 | SV08 Max | Difference | |
|---|---|---|---|
| Height | 575 mm | 750 mm | −175 mm |
| Width | 550 mm | 700 mm | −150 mm |
| Depth | 537 mm | 710 mm | −173 mm |
| Weight | 21.5 kg | 21.5 kg | = |
Drawn to the same scale from the official dimensions (front and side).
Why is SV08 better than SV08 Max?
- Delivered asPartially assembled vs Kit
Why is SV08 Max better than SV08?
- Build volume42.3 L vs 125 L3×
- Max volumetric flow30 mm³/s vs 50 mm³/s+67%
- Build height (Z)345 mm vs 500 mm+45%
- Number of supported materials4 vs 7+75%
- Build width (X)350 mm vs 500 mm+43%
- Build depth (Y)350 mm vs 500 mm+43%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | Partially assembled | Kit |
| All-metal frame | Yes | — |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 350 mm | 500 mm |
| Build depth (Y) | 350 mm | 500 mm |
| Build height (Z) | 345 mm | 500 mm |
| Build volume | 42.3 L | 125 L |
| Speed | ||
| Max print speed | 700 mm/s | 700 mm/s |
| Max acceleration | 40,000 mm/s² | 40,000 mm/s² |
| Max volumetric flow | 30 mm³/s | 50 mm³/s |
| Print quality | ||
| Finest layer height | 0.08 mm | 0.08 mm |
| Thickest layer height | 0.36 mm | 0.36 mm |
| Vibration compensation (input shaping) | Yes | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 300 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | Carbon, PETG, PLA, TPU | ABS, ASA, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 4 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 100 °C |
| Enclosure | ||
| Actively heated chamber | No | No |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 5″ | — |
| Touchscreen | No | No |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | Yes | — |
| Size & power | ||
| Width | 550 mm | 700 mm |
| Depth | 537 mm | 710 mm |
| Height | 575 mm | 750 mm |
| Weight | 21.5 kg | 21.5 kg |
| Rated power | 1,000 W | — |
