- scrc.us.com
- Compare
- Artisan vs SV08 Max
Snapmaker Artisan vs Sovol SV08 Max
What Artisan does better (5) and where SV08 Max wins (6) — every spec side by side.
Dimensions
Size comparison
ArtisanSV08 Max
| Artisan | SV08 Max | Difference | |
|---|---|---|---|
| Height | 634 mm | 750 mm | −116 mm |
| Width | 580 mm | 700 mm | −120 mm |
| Depth | 620 mm | 710 mm | −90 mm |
| Weight | 25 kg | 21.5 kg | +3.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Artisan better than SV08 Max?
- Finest layer height0.05 mm vs 0.08 mm+60%
- Delivered asFully assembled vs Kit
- TouchscreenYes · SV08 Max: No
- Max bed temperature110 °C vs 100 °C+10%
- Number of supported materials10 vs 7+43%
Why is SV08 Max better than Artisan?
- Build volume56 L vs 125 L2.2×
- Max print speed180 mm/s vs 700 mm/s3.9×
- Build height (Z)400 mm vs 500 mm+25%
- Build width (X)350 mm vs 500 mm+43%
- Build depth (Y)400 mm vs 500 mm+25%
- Weight25 kg vs 21.5 kg+16%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | Fully assembled | Kit |
| All-metal frame | Yes | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 350 mm | 500 mm |
| Build depth (Y) | 400 mm | 500 mm |
| Build height (Z) | 400 mm | 500 mm |
| Build volume | 56 L | 125 L |
| Speed | ||
| Max print speed | 180 mm/s | 700 mm/s |
| Max acceleration | — | 40,000 mm/s² |
| Max volumetric flow | — | 50 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.08 mm |
| Thickest layer height | 0.3 mm | 0.36 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 300 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, ASA, HIPS, PA, PA-CF, PA-GF, PETG, PLA, PVA, TPU | ABS, ASA, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 10 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | — | No |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 7″ | — |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Laser engraving module | Yes | — |
| Size & power | ||
| Width | 580 mm | 700 mm |
| Depth | 620 mm | 710 mm |
| Height | 634 mm | 750 mm |
| Weight | 25 kg | 21.5 kg |
| Rated power | 800 W | — |
| Noise level | 50 dB | — |
