- scrc.us.com
- Compare
- X-SMART 3 vs Aquila D1
QIDI X-SMART 3 vs Voxelab Aquila D1
What X-SMART 3 does better (3) and where Aquila D1 wins (6) — every spec side by side.
Dimensions
Size comparison
X-SMART 3Aquila D1
| X-SMART 3 | Aquila D1 | Difference | |
|---|---|---|---|
| Height | 397 mm | 551 mm | −154 mm |
| Width | 370 mm | 470 mm | −100 mm |
| Depth | 362 mm | 440 mm | −78 mm |
| Weight | 10.5 kg | 9 kg | +1.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is X-SMART 3 better than Aquila D1?
- Max print speed500 mm/s vs 180 mm/s2.8×
- Max bed temperature120 °C vs 110 °C+9%
- Number of supported materials6 vs 5+20%
Why is Aquila D1 better than X-SMART 3?
- Build volume5.5 L vs 13.8 L2.5×
- Build height (Z)170 mm vs 250 mm+47%
- Max nozzle temperature280 °C vs 300 °C+7%
- Build width (X)180 mm vs 235 mm+31%
- Build depth (Y)180 mm vs 235 mm+31%
- Weight10.5 kg vs 9 kg+17%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Bed-slinger (i3-style) |
| Delivered as | — | Kit |
| All-metal frame | — | Yes |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 180 mm | 235 mm |
| Build depth (Y) | 180 mm | 235 mm |
| Build height (Z) | 170 mm | 250 mm |
| Build volume | 5.5 L | 13.8 L |
| Speed | ||
| Max print speed | 500 mm/s | 180 mm/s |
| Max volumetric flow | 30 mm³/s | — |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 280 °C | 300 °C |
| Direct-drive extruder | — | No |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.8 | — |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PETG, TPU, etc. | ABS, HIPS, PETG, PLA, TPU |
| Number of supported materials | 6 | 5 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 110 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | USB, SD card |
| Wi-Fi | Yes | — |
| USB | Yes | Yes |
| SD card | — | Yes |
| Screen size | 4.3″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 370 mm | 470 mm |
| Depth | 362 mm | 440 mm |
| Height | 397 mm | 551 mm |
| Weight | 10.5 kg | 9 kg |
| Rated power | 350 W | 350 W |
