- scrc.us.com
- Compare
- MD-600D vs SV08 Max
Mingda MD-600D vs Sovol SV08 Max
What MD-600D does better (8) and where SV08 Max wins (3) — every spec side by side.
Dimensions
Size comparison
MD-600DSV08 Max
| MD-600D | SV08 Max | Difference | |
|---|---|---|---|
| Height | 1,265 mm | 750 mm | +515 mm |
| Width | 1,325 mm | 700 mm | +625 mm |
| Depth | 965 mm | 710 mm | +255 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is MD-600D better than SV08 Max?
- Build volume216 L vs 125 L+73%
- Nozzles2 vs 12×
- Max nozzle temperature350 °C vs 300 °C+17%
- TouchscreenYes · SV08 Max: No
- Build height (Z)600 mm vs 500 mm+20%
- Max bed temperature110 °C vs 100 °C+10%
- Build width (X)600 mm vs 500 mm+20%
- Build depth (Y)600 mm vs 500 mm+20%
Why is SV08 Max better than MD-600D?
- Max acceleration10,000 mm/s² vs 40,000 mm/s²4×
- Max print speed300 mm/s vs 700 mm/s2.3×
- Max volumetric flow40 mm³/s vs 50 mm³/s+25%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Kit |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 600 mm | 500 mm |
| Build depth (Y) | 600 mm | 500 mm |
| Build height (Z) | 600 mm | 500 mm |
| Build volume | 216 L | 125 L |
| Speed | ||
| Max print speed | 300 mm/s | 700 mm/s |
| Max acceleration | 10,000 mm/s² | 40,000 mm/s² |
| Max volumetric flow | 40 mm³/s | 50 mm³/s |
| Print quality | ||
| Finest layer height | — | 0.08 mm |
| Thickest layer height | — | 0.36 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Toolheads | — | 1 |
| Nozzles | 2 | 1 |
| Filament diameter | — | 1.75 mm |
| Supported materials | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA | ABS, ASA, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 7 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Enclosure | ||
| Actively heated chamber | — | No |
| Connectivity & control | ||
| Connectivity | Wi-Fi | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | — | Yes |
| USB | — | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 10″ | — |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 1,325 mm | 700 mm |
| Depth | 965 mm | 710 mm |
| Height | 1,265 mm | 750 mm |
| Weight | — | 21.5 kg |
| Rated power | 2,400 W | — |
