- scrc.us.com
- Compare
- MD-600D vs Pro3 Plus HS
Mingda MD-600D vs Raise3D Pro3 Plus HS
What MD-600D does better (8) and where Pro3 Plus HS wins (2) — every spec side by side.
vs
6.9Speed9.6
5.9Print quality5.9
7.5Material versatility5.2
9.6Build volume8.0
8.6Ease of use3.4
Dimensions
Size comparison
MD-600DPro3 Plus HS
| MD-600D | Pro3 Plus HS | Difference | |
|---|---|---|---|
| Height | 1,265 mm | 1,105 mm | +160 mm |
| Width | 1,325 mm | 620 mm | +705 mm |
| Depth | 965 mm | 626 mm | +339 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is MD-600D better than Pro3 Plus HS?
- Build volume216 L vs 46.3 L4.7×
- Engineering materials (PA, PC, CF)Yes · Pro3 Plus HS: No
- Max nozzle temperature350 °C vs 320 °C+9%
- Build width (X)600 mm vs 255 mm2.4×
- Build depth (Y)600 mm vs 300 mm2×
- TouchscreenYes · Pro3 Plus HS: No
- Screen size10″ vs 7″+43%
- Number of supported materials7 vs 6+17%
Why is Pro3 Plus HS better than MD-600D?
- Max print speed300 mm/s vs 500 mm/s+67%
- Max bed temperature110 °C vs 120 °C+9%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 255 mm |
| Build depth (Y) | 600 mm | 300 mm |
| Build height (Z) | 600 mm | 605 mm |
| Build volume | 216 L | 46.3 L |
| Speed | ||
| Max print speed | 300 mm/s | 500 mm/s |
| Max acceleration | 10,000 mm/s² | — |
| Max volumetric flow | 40 mm³/s | — |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.6 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 320 °C |
| Default nozzle | 0.6 mm | 0.4 mm |
| Toolheads | — | 2 |
| Nozzles | 2 | 2 |
| Filament diameter | — | 1.75 mm |
| Supported materials | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA | PLA, ABS, HIPS, TPU, PETG, ASA |
| Number of supported materials | 7 | 6 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Multi-colour system | — | IDEX |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 120 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | — | Yes |
| USB | — | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 10″ | 7″ |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 1,325 mm | 620 mm |
| Depth | 965 mm | 626 mm |
| Height | 1,265 mm | 1,105 mm |
| Weight | — | 64 kg |
| Rated power | 2,400 W | 600 W |
| Noise level | — | 55 dB |
