- scrc.us.com
- Compare
- Sketch Sprint vs Cube One
MakerBot Sketch Sprint vs Renkforce Cube One
What Sketch Sprint does better (4) and where Cube One wins (1) — every spec side by side.
vs
3.6Build volume2.1
Dimensions
Size comparison
Sketch SprintCube One
| Sketch Sprint | Cube One | Difference | |
|---|---|---|---|
| Height | 466 mm | 254 mm | +212 mm |
| Width | 452 mm | 208 mm | +244 mm |
| Depth | 400 mm | 206 mm | +194 mm |
| Weight | 16 kg | 2.9 kg | +13.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Sketch Sprint better than Cube One?
- Build volume10.6 L vs 0.5 L21.2×
- Build height (Z)220 mm vs 80 mm2.8×
- Build width (X)220 mm vs 80 mm2.8×
- Build depth (Y)220 mm vs 80 mm2.8×
Why is Cube One better than Sketch Sprint?
- Weight16 kg vs 2.9 kg5.5×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | 220 mm | 80 mm |
| Build depth (Y) | 220 mm | 80 mm |
| Build height (Z) | 220 mm | 80 mm |
| Build volume | 10.6 L | 0.5 L |
| Print quality | ||
| Finest layer height | 0.2 mm | — |
| Thickest layer height | 0.2 mm | — |
| Extruder & hotend | ||
| Default nozzle | 0.4 mm | 0.7 mm |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | — |
| Nozzles | 1 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA | PLA |
| Number of supported materials | 1 | 1 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | No |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Features | ||
| Built-in camera | Yes | — |
| Size & power | ||
| Width | 452 mm | 208 mm |
| Depth | 400 mm | 206 mm |
| Height | 466 mm | 254 mm |
| Weight | 16 kg | 2.9 kg |
