- scrc.us.com
- Compare
- Funmat Pro 310 vs PRO HT90
INTAMSYS Funmat Pro 310 vs Prusa PRO HT90
What Funmat Pro 310 does better (3) and where PRO HT90 wins (5) — every spec side by side.
vs
6.7Speed8.3
3.3Print quality8.6
8.6Material versatility9.7
5.8Ease of use9.7
Dimensions
Size comparison
Funmat Pro 310PRO HT90
| Funmat Pro 310 | PRO HT90 | Difference | |
|---|---|---|---|
| Height | 700 mm | 1,050 mm | −350 mm |
| Width | 700 mm | 530 mm | +170 mm |
| Depth | 655 mm | 530 mm | +125 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Funmat Pro 310 better than PRO HT90?
- Nozzles2 vs 12×
- Max bed temperature160 °C vs 155 °C+3%
- Max chamber temperature100 °C vs 90 °C+11%
Why is PRO HT90 better than Funmat Pro 310?
- Max acceleration10,000 mm/s² vs 20,000 mm/s²2×
- Finest layer height0.1 mm vs 0.05 mm2×
- Max nozzle temperature350 °C vs 500 °C+43%
- Max print speed500 mm/s vs 600 mm/s+20%
- Number of supported materials7 vs 11+57%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| All-metal frame | — | Yes |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 305 mm | — |
| Build depth (Y) | 260 mm | — |
| Build height (Z) | 260 mm | — |
| Build volume | 20.6 L | — |
| Speed | ||
| Max print speed | 500 mm/s | 600 mm/s |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 500 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | — | 0.4 mm |
| Toolheads | — | 1 |
| Nozzles | 2 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PC, ABS-HS, PPA-CF, GF, PA, PPS, support materials | ABS, ASA, CPE, HIPS, PA, PC, PETG, PLA, PP, TPE, TPU |
| Number of supported materials | 7 | 11 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 160 °C | 155 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 100 °C | 90 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | No |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | — | 6.5″ |
| Touchscreen | — | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 700 mm | 530 mm |
| Depth | 655 mm | 530 mm |
| Height | 700 mm | 1,050 mm |
| Weight | — | 43.5 kg |
| Rated power | 1,500 W | 1,900 W |
