- scrc.us.com
- Compare
- A10T vs A20T
Geeetech A10T vs Geeetech A20T
What A10T does better (1) and where A20T wins (3) — every spec side by side.
Dimensions
Size comparison
A10TA20T
| A10T | A20T | Difference | |
|---|---|---|---|
| Height | 485 mm | 480 mm | +5 mm |
| Width | 478 mm | 442 mm | +36 mm |
| Depth | 413 mm | 447 mm | −34 mm |
| Weight | 8 kg | 9 kg | −1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is A10T better than A20T?
- Weight8 kg vs 9 kg+13%
Why is A20T better than A10T?
- Build volume12.1 L vs 15.6 L+29%
- Build width (X)220 mm vs 250 mm+14%
- Build depth (Y)220 mm vs 250 mm+14%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Bed-slinger (i3-style) | Bed-slinger (i3-style) |
| Delivered as | Partially assembled | — |
| All-metal frame | Yes | Yes |
| Build volume | ||
| Build width (X) | 220 mm | 250 mm |
| Build depth (Y) | 220 mm | 250 mm |
| Build height (Z) | 250 mm | 250 mm |
| Build volume | 12.1 L | 15.6 L |
| Speed | ||
| Max print speed | 60 mm/s | 60 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.1 mm |
| Extruder & hotend | ||
| Direct-drive extruder | No | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PLA | ABS, PLA |
| Number of supported materials | 2 | 2 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | — |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB, SD card |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Touchscreen | No | No |
| Features | ||
| Built-in camera | — | No |
| Filament runout sensor | Yes | — |
| Size & power | ||
| Width | 478 mm | 442 mm |
| Depth | 413 mm | 447 mm |
| Height | 485 mm | 480 mm |
| Weight | 8 kg | 9 kg |
| Rated power | 350 W | 350 W |
