- scrc.us.com
- Compare
- Guider 3 Ultra vs Plus 4
Flashforge Guider 3 Ultra vs QIDI Plus 4
What Guider 3 Ultra does better (6) and where Plus 4 wins (4) — every spec side by side.
vs
7.2Speed8.7
7.8Print quality7.5
5.9Material versatility9.3
8.8Build volume7.5
9.0Ease of use8.5
Dimensions
Size comparison
Guider 3 UltraPlus 4
| Guider 3 Ultra | Plus 4 | Difference | |
|---|---|---|---|
| Height | 1,070 mm | 550 mm | +520 mm |
| Width | 635 mm | 505 mm | +130 mm |
| Depth | 550 mm | 487 mm | +63 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Guider 3 Ultra better than Plus 4?
- Build volume65.3 L vs 26 L2.5×
- Build height (Z)600 mm vs 280 mm2.1×
- Nozzles2 vs 12×
- Screen size7″ vs 5″+40%
- Build width (X)330 mm vs 305 mm+8%
- Build depth (Y)330 mm vs 305 mm+8%
Why is Plus 4 better than Guider 3 Ultra?
- Max print speed250 mm/s vs 600 mm/s2.4×
- Engineering materials (PA, PC, CF)No · Guider 3 Ultra: Yes
- Max nozzle temperature350 °C vs 370 °C+6%
- Number of supported materials4 vs 82×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 330 mm | 305 mm |
| Build depth (Y) | 330 mm | 305 mm |
| Build height (Z) | 600 mm | 280 mm |
| Build volume | 65.3 L | 26 L |
| Speed | ||
| Max print speed | 250 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Thickest layer height | 0.4 mm | 0.4 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 370 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.8 | — |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | 2 | 1 |
| Filament diameter | — | 1.75 mm |
| Supported materials | PLA, PETG, ASA, ABS | ABS, ASA, Carbon, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 4 | 8 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 120 °C |
| Flexible magnetic build plate | — | Yes |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Actively heated chamber | — | Yes |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Camera resolution | — | 2.1 MP |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 635 mm | 505 mm |
| Depth | 550 mm | 487 mm |
| Height | 1,070 mm | 550 mm |
| Weight | — | 27 kg |
| Rated power | — | 450 W |
