- scrc.us.com
- Compare
- Guider 3 Plus vs SV08 Max
Flashforge Guider 3 Plus vs Sovol SV08 Max
What Guider 3 Plus does better (6) and where SV08 Max wins (5) — every spec side by side.
vs
5.5Speed9.4
8.0Print quality5.5
8.4Material versatility5.8
6.2Build volume8.0
8.2Ease of use5.3
Dimensions
Size comparison
Guider 3 PlusSV08 Max
| Guider 3 Plus | SV08 Max | Difference | |
|---|---|---|---|
| Height | 1,070 mm | 750 mm | +320 mm |
| Width | 635 mm | 700 mm | −65 mm |
| Depth | 550 mm | 710 mm | −160 mm |
| Weight | 70 kg | 21.5 kg | +48.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Guider 3 Plus better than SV08 Max?
- Finest layer height0.05 mm vs 0.08 mm+60%
- Max nozzle temperature320 °C vs 300 °C+7%
- TouchscreenYes · SV08 Max: No
- Build height (Z)600 mm vs 500 mm+20%
- Max bed temperature120 °C vs 100 °C+20%
- Number of supported materials11 vs 7+57%
Why is SV08 Max better than Guider 3 Plus?
- Max print speed250 mm/s vs 700 mm/s2.8×
- Build volume73.5 L vs 125 L+70%
- Weight70 kg vs 21.5 kg3.3×
- Build width (X)350 mm vs 500 mm+43%
- Build depth (Y)350 mm vs 500 mm+43%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Kit |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 350 mm | 500 mm |
| Build depth (Y) | 350 mm | 500 mm |
| Build height (Z) | 600 mm | 500 mm |
| Build volume | 73.5 L | 125 L |
| Speed | ||
| Max print speed | 250 mm/s | 700 mm/s |
| Max acceleration | — | 40,000 mm/s² |
| Max volumetric flow | — | 50 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.08 mm |
| Thickest layer height | 0.4 mm | 0.36 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 320 °C | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.8 | 0.4, 0.8 |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | — | 1.75 mm |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA, PLA-CF, PETG-CF, PETG-GF, PA-CF, PA-GF | ABS, ASA, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 11 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 100 °C |
| Enclosure | ||
| Actively heated chamber | — | No |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| App control | Yes | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | No |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 635 mm | 700 mm |
| Depth | 550 mm | 710 mm |
| Height | 1,070 mm | 750 mm |
| Weight | 70 kg | 21.5 kg |
