- scrc.us.com
- Compare
- Creator 4A vs S7
Flashforge Creator 4A vs UltiMaker S7
What Creator 4A does better (11) and where S7 wins (2) — every spec side by side.
vs
5.9Speed2.1
9.2Print quality9.4
7.9Material versatility5.4
9.2Build volume5.1
9.4Ease of use2.9
Dimensions
Size comparison
Creator 4AS7
| Creator 4A | S7 | Difference | |
|---|---|---|---|
| Height | 1,000 mm | 800 mm | +200 mm |
| Width | 840 mm | 495 mm | +345 mm |
| Depth | 675 mm | 585 mm | +90 mm |
| Weight | 90 kg | 29.1 kg | +60.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator 4A better than S7?
- Build volume70 L vs 23.8 L2.9×
- Max print speed200 mm/s vs 24 mm/s8.3×
- Engineering materials (PA, PC, CF)Yes · S7: No
- Built-in cameraYes · S7: No
- Build height (Z)500 mm vs 300 mm+67%
- Number of supported materials8 vs 24×
- Finest layer height0.015 mm vs 0.02 mm+33%
- Toolheads2 vs 12×
- Screen size7″ vs 4.7″+49%
- Build depth (Y)350 mm vs 240 mm+46%
- Build width (X)400 mm vs 330 mm+21%
Why is S7 better than Creator 4A?
- Weight90 kg vs 29.1 kg3.1×
- Max bed temperature130 °C vs 140 °C+8%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 400 mm | 330 mm |
| Build depth (Y) | 350 mm | 240 mm |
| Build height (Z) | 500 mm | 300 mm |
| Build volume | 70 L | 23.8 L |
| Speed | ||
| Max print speed | 200 mm/s | 24 mm/s |
| Print quality | ||
| Finest layer height | 0.015 mm | 0.02 mm |
| Thickest layer height | — | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 320 °C | — |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | — |
| Supported nozzle sizes (mm) | 0.4, 0.6, 0.8 | — |
| Toolheads | 2 | 1 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 2.85 mm |
| Supported materials | ABS, ASA, PA, PC, PETG, PLA, PP, TPU | PVA, PLA |
| Number of supported materials | 8 | 2 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Multi-colour | ||
| Multi-colour printing | Yes | Yes |
| Max colours / materials | 2 | 2 |
| Multi-colour system | IDEX | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 130 °C | 140 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Cloud printing | Yes | — |
| Screen size | 7″ | 4.7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | No |
| Filament runout sensor | Yes | — |
| Size & power | ||
| Width | 840 mm | 495 mm |
| Depth | 675 mm | 585 mm |
| Height | 1,000 mm | 800 mm |
| Weight | 90 kg | 29.1 kg |
| Rated power | 2,320 W | 500 W |
| Noise level | — | 50 dB |
