- scrc.us.com
- Compare
- Creator 4A vs MD-600D
Flashforge Creator 4A vs Mingda MD-600D
What Creator 4A does better (2) and where MD-600D wins (7) — every spec side by side.
vs
5.9Speed6.9
9.2Print quality5.9
7.7Material versatility7.5
9.2Build volume9.6
9.4Ease of use8.6
Dimensions
Size comparison
Creator 4AMD-600D
| Creator 4A | MD-600D | Difference | |
|---|---|---|---|
| Height | 1,000 mm | 1,265 mm | −265 mm |
| Width | 840 mm | 1,325 mm | −485 mm |
| Depth | 675 mm | 965 mm | −290 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator 4A better than MD-600D?
- Max bed temperature130 °C vs 110 °C+18%
- Number of supported materials8 vs 7+14%
Why is MD-600D better than Creator 4A?
- Build volume70 L vs 216 L3.1×
- Max print speed200 mm/s vs 300 mm/s+50%
- Max nozzle temperature320 °C vs 350 °C+9%
- Build height (Z)500 mm vs 600 mm+20%
- Build depth (Y)350 mm vs 600 mm+71%
- Build width (X)400 mm vs 600 mm+50%
- Screen size7″ vs 10″+43%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 400 mm | 600 mm |
| Build depth (Y) | 350 mm | 600 mm |
| Build height (Z) | 500 mm | 600 mm |
| Build volume | 70 L | 216 L |
| Speed | ||
| Max print speed | 200 mm/s | 300 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.015 mm | — |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 320 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6, 0.8 | — |
| Toolheads | 2 | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | ABS, ASA, PA, PC, PETG, PLA, PP, TPU | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA |
| Number of supported materials | 8 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 2 | — |
| Multi-colour system | IDEX | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 130 °C | 110 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | — |
| USB | Yes | — |
| Cloud printing | Yes | — |
| Screen size | 7″ | 10″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 840 mm | 1,325 mm |
| Depth | 675 mm | 965 mm |
| Height | 1,000 mm | 1,265 mm |
| Weight | 90 kg | — |
| Rated power | 2,320 W | 2,400 W |
