- scrc.us.com
- Compare
- Neptune 4 Plus vs Super Racer SR
Elegoo Neptune 4 Plus vs FLSUN Super Racer SR
What Neptune 4 Plus does better (8) and where Super Racer SR wins (0) — every spec side by side.
vs
7.5Speed5.3
7.0Print quality5.5
4.9Material versatility2.6
9.4Build volume7.2
4.2Ease of use3.0
Dimensions
Size comparison
Neptune 4 PlusSuper Racer SR
| Neptune 4 Plus | Super Racer SR | Difference | |
|---|---|---|---|
| Height | 640 mm | 960 mm | −320 mm |
| Width | 578 mm | 440 mm | +138 mm |
| Depth | 533 mm | 390 mm | +143 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Neptune 4 Plus better than Super Racer SR?
- Build volume39.4 L vs 17.5 L2.3×
- Max print speed500 mm/s vs 200 mm/s2.5×
- Direct-drive extruderYes · Super Racer SR: No
- Max nozzle temperature300 °C vs 260 °C+15%
- Build height (Z)385 mm vs 330 mm+17%
- Build width (X)320 mm vs 260 mm+23%
- Build depth (Y)320 mm vs 260 mm+23%
- Screen size4.3″ vs 3.5″+23%
Why is Super Racer SR better than Neptune 4 Plus?
Super Racer SR has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Bed-slinger (i3-style) | Delta |
| Delivered as | Partially assembled | Partially assembled |
| All-metal frame | Yes | Yes |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 320 mm | 260 mm |
| Build depth (Y) | 320 mm | 260 mm |
| Build height (Z) | 385 mm | 330 mm |
| Build volume | 39.4 L | 17.5 L |
| Speed | ||
| Max print speed | 500 mm/s | 200 mm/s |
| Max acceleration | 12,000 mm/s² | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Thickest layer height | 0.3 mm | 0.3 mm |
| Vibration compensation (input shaping) | Yes | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 260 °C |
| Direct-drive extruder | Yes | No |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | brass | brass |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PETG, PLA, TPU | ABS, PETG, PLA, Wood |
| Number of supported materials | 4 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 100 °C |
| Enclosure | ||
| Actively heated chamber | No | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB, SD card | USB, SD card |
| Wi-Fi | Yes | — |
| Ethernet | Yes | — |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Bluetooth | No | — |
| Screen size | 4.3″ | 3.5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | No |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | Yes | Yes |
| Size & power | ||
| Width | 578 mm | 440 mm |
| Depth | 533 mm | 390 mm |
| Height | 640 mm | 960 mm |
| Weight | 14.4 kg | — |
| Rated power | — | 300 W |
