- scrc.us.com
- Compare
- Peek-300 vs MD-600D
CreatBot Peek-300 vs Mingda MD-600D
What Peek-300 does better (3) and where MD-600D wins (7) — every spec side by side.
Dimensions
Size comparison
Peek-300MD-600D
| Peek-300 | MD-600D | Difference | |
|---|---|---|---|
| Height | 750 mm | 1,265 mm | −515 mm |
| Width | 650 mm | 1,325 mm | −675 mm |
| Depth | 600 mm | 965 mm | −365 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-300 better than MD-600D?
- Max nozzle temperature480 °C vs 350 °C+37%
- Max bed temperature200 °C vs 110 °C+82%
- Number of supported materials17 vs 72.4×
Why is MD-600D better than Peek-300?
- Build volume36 L vs 216 L6×
- Max print speed150 mm/s vs 300 mm/s2×
- Wi-FiNo · Peek-300: Yes
- Build height (Z)400 mm vs 600 mm+50%
- Screen size4.3″ vs 10″2.3×
- Build width (X)300 mm vs 600 mm2×
- Build depth (Y)300 mm vs 600 mm2×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 600 mm |
| Build depth (Y) | 300 mm | 600 mm |
| Build height (Z) | 400 mm | 600 mm |
| Build volume | 36 L | 216 L |
| Speed | ||
| Max print speed | 150 mm/s | 300 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.04 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA |
| Number of supported materials | 17 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 110 °C |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 120 °C | — |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi |
| Wi-Fi | No | Yes |
| Ethernet | No | — |
| USB | Yes | — |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 10″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 650 mm | 1,325 mm |
| Depth | 600 mm | 965 mm |
| Height | 750 mm | 1,265 mm |
| Weight | 100 kg | — |
| Rated power | 4,600 W | 2,400 W |
