- scrc.us.com
- Compare
- Peek-300 vs Funmat Pro 310 APOLLO
CreatBot Peek-300 vs INTAMSYS Funmat Pro 310 APOLLO
What Peek-300 does better (7) and where Funmat Pro 310 APOLLO wins (6) — every spec side by side.
vs
3.6Speed5.1
8.2Print quality3.3
9.5Material versatility9.2
7.4Build volume4.5
2.6Ease of use9.0
Dimensions
Size comparison
Peek-300Funmat Pro 310 APOLLO
| Peek-300 | Funmat Pro 310 APOLLO | Difference | |
|---|---|---|---|
| Height | 750 mm | 700 mm | +50 mm |
| Width | 650 mm | 700 mm | −50 mm |
| Depth | 600 mm | 655 mm | −55 mm |
| Weight | 100 kg | 80 kg | +20 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-300 better than Funmat Pro 310 APOLLO?
- Build volume36 L vs 20.6 L+75%
- Finest layer height0.04 mm vs 0.1 mm2.5×
- Build height (Z)400 mm vs 260 mm+54%
- Max nozzle temperature480 °C vs 450 °C+7%
- Max bed temperature200 °C vs 160 °C+25%
- Max chamber temperature120 °C vs 100 °C+20%
- Build depth (Y)300 mm vs 260 mm+15%
Why is Funmat Pro 310 APOLLO better than Peek-300?
- Max print speed150 mm/s vs 500 mm/s3.3×
- Wi-FiNo · Peek-300: Yes
- Number of supported materials17 vs 372.2×
- EthernetNo · Peek-300: Yes
- Screen size4.3″ vs 7″+63%
- Weight100 kg vs 80 kg+25%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 300 mm | 305 mm |
| Build depth (Y) | 300 mm | 260 mm |
| Build height (Z) | 400 mm | 260 mm |
| Build volume | 36 L | 20.6 L |
| Speed | ||
| Max print speed | 150 mm/s | 500 mm/s |
| Max acceleration | — | 8,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.04 mm | 0.1 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 450 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK | PEEK, PEEK-CF, PEEK-GF, PEKK, SP5000, AM200, ABS+, ABS-GF, ABS-HS, ASA, HIPS, PA12-CF, PA6, 66, PA6-CF, PC, PC-ABS, PC-FR, PC-PBT, PET-CF, PETG, PET-GF, PLA, PPA-CF, PPA-GF, PPS, PPS-CF, PPS-GF, PVA, SP3030, SP3050, SP5010, TPU95A, KIMYA ABS-ESD, BASF PC, ABS-FR, WANHUA PA12 |
| Number of supported materials | 17 | 37 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 160 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 120 °C | 100 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 650 mm | 700 mm |
| Depth | 600 mm | 655 mm |
| Height | 750 mm | 700 mm |
| Weight | 100 kg | 80 kg |
| Rated power | 4,600 W | 1,800 W |
