- scrc.us.com
- Compare
- Peek-250 vs PRO HT90
CreatBot Peek-250 vs Prusa PRO HT90
What Peek-250 does better (4) and where PRO HT90 wins (3) — every spec side by side.
Dimensions
Size comparison
Peek-250PRO HT90
| Peek-250 | PRO HT90 | Difference | |
|---|---|---|---|
| Height | 815 mm | 1,050 mm | −235 mm |
| Width | 630 mm | 530 mm | +100 mm |
| Depth | 555 mm | 530 mm | +25 mm |
| Weight | 100 kg | 43.5 kg | +56.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than PRO HT90?
- Max chamber temperature200 °C vs 90 °C2.2×
- Max bed temperature200 °C vs 155 °C+29%
- Number of supported materials16 vs 11+45%
- Screen size7″ vs 6.5″+8%
Why is PRO HT90 better than Peek-250?
- Max print speed180 mm/s vs 600 mm/s3.3×
- Max nozzle temperature480 °C vs 500 °C+4%
- Weight100 kg vs 43.5 kg2.3×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| All-metal frame | — | Yes |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 250 mm | — |
| Build depth (Y) | 250 mm | — |
| Build height (Z) | 300 mm | — |
| Build volume | 18.8 L | — |
| Speed | ||
| Max print speed | 180 mm/s | 600 mm/s |
| Max acceleration | — | 20,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 500 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6 | — |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | ABS, ASA, CPE, HIPS, PA, PC, PETG, PLA, PP, TPE, TPU |
| Number of supported materials | 16 | 11 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 155 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 200 °C | 90 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | No |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 7″ | 6.5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 630 mm | 530 mm |
| Depth | 555 mm | 530 mm |
| Height | 815 mm | 1,050 mm |
| Weight | 100 kg | 43.5 kg |
| Rated power | 2,500 W | 1,900 W |
