- scrc.us.com
- Compare
- Peek-250 vs Funmat Pro 310 APOLLO
CreatBot Peek-250 vs INTAMSYS Funmat Pro 310 APOLLO
What Peek-250 does better (4) and where Funmat Pro 310 APOLLO wins (6) — every spec side by side.
vs
4.6Speed5.1
9.6Material versatility9.2
7.3Build volume4.5
9.7Ease of use9.0
Dimensions
Size comparison
Peek-250Funmat Pro 310 APOLLO
| Peek-250 | Funmat Pro 310 APOLLO | Difference | |
|---|---|---|---|
| Height | 815 mm | 700 mm | +115 mm |
| Width | 630 mm | 700 mm | −70 mm |
| Depth | 555 mm | 655 mm | −100 mm |
| Weight | 100 kg | 80 kg | +20 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than Funmat Pro 310 APOLLO?
- Max nozzle temperature480 °C vs 450 °C+7%
- Max bed temperature200 °C vs 160 °C+25%
- Max chamber temperature200 °C vs 100 °C2×
- Build height (Z)300 mm vs 260 mm+15%
Why is Funmat Pro 310 APOLLO better than Peek-250?
- Max print speed180 mm/s vs 500 mm/s2.8×
- Build volume18.8 L vs 20.6 L+10%
- Number of supported materials16 vs 372.3×
- Weight100 kg vs 80 kg+25%
- Build width (X)250 mm vs 305 mm+22%
- Build depth (Y)250 mm vs 260 mm+4%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 250 mm | 305 mm |
| Build depth (Y) | 250 mm | 260 mm |
| Build height (Z) | 300 mm | 260 mm |
| Build volume | 18.8 L | 20.6 L |
| Speed | ||
| Max print speed | 180 mm/s | 500 mm/s |
| Max acceleration | — | 8,000 mm/s² |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 450 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6 | — |
| Nozzles | — | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | PEEK, PEEK-CF, PEEK-GF, PEKK, SP5000, AM200, ABS+, ABS-GF, ABS-HS, ASA, HIPS, PA12-CF, PA6, 66, PA6-CF, PC, PC-ABS, PC-FR, PC-PBT, PET-CF, PETG, PET-GF, PLA, PPA-CF, PPA-GF, PPS, PPS-CF, PPS-GF, PVA, SP3030, SP3050, SP5010, TPU95A, KIMYA ABS-ESD, BASF PC, ABS-FR, WANHUA PA12 |
| Number of supported materials | 16 | 37 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 160 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 200 °C | 100 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| Screen size | 7″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 630 mm | 700 mm |
| Depth | 555 mm | 655 mm |
| Height | 815 mm | 700 mm |
| Weight | 100 kg | 80 kg |
| Rated power | 2,500 W | 1,800 W |
