- scrc.us.com
- Compare
- Peek-250 vs T1
CreatBot Peek-250 vs FLSUN T1
What Peek-250 does better (5) and where T1 wins (5) — every spec side by side.
Dimensions
Size comparison
Peek-250T1
| Peek-250 | T1 | Difference | |
|---|---|---|---|
| Height | 815 mm | 836 mm | −21 mm |
| Width | 630 mm | 436 mm | +194 mm |
| Depth | 555 mm | 490 mm | +65 mm |
| Weight | 100 kg | 16.8 kg | +83.2 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than T1?
- Max nozzle temperature480 °C vs 300 °C+60%
- Max bed temperature200 °C vs 110 °C+82%
- Build volume18.8 L vs 17.5 L+7%
- Number of supported materials16 vs 9+78%
- Screen size7″ vs 4.3″+63%
Why is T1 better than Peek-250?
- Max print speed180 mm/s vs 1,000 mm/s5.6×
- Weight100 kg vs 16.8 kg6×
- Build height (Z)300 mm vs 330 mm+10%
- Build width (X)250 mm vs 260 mm+4%
- Build depth (Y)250 mm vs 260 mm+4%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | — | Partially assembled |
| All-metal frame | — | Yes |
| Build volume | ||
| Build width (X) | 250 mm | 260 mm |
| Build depth (Y) | 250 mm | 260 mm |
| Build height (Z) | 300 mm | 330 mm |
| Build volume | 18.8 L | 17.5 L |
| Speed | ||
| Max print speed | 180 mm/s | 1,000 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.35 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 300 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6 | — |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | ABS, ASA, PA, PC, PETG, PLA, PVA, TPU, Wood |
| Number of supported materials | 16 | 9 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 110 °C |
| Flexible magnetic build plate | — | Yes |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 200 °C | — |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, USB |
| Wi-Fi | — | Yes |
| USB | Yes | Yes |
| Screen size | 7″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | — | Yes |
| Built-in filament drying | — | Yes |
| Size & power | ||
| Width | 630 mm | 436 mm |
| Depth | 555 mm | 490 mm |
| Height | 815 mm | 836 mm |
| Weight | 100 kg | 16.8 kg |
| Rated power | 2,500 W | 450 W |
