- scrc.us.com
- Compare
- DE vs P1
CreatBot DE vs Optimus P1
What DE does better (4) and where P1 wins (4) — every spec side by side.
Why is DE better than P1?
- Engineering materials (PA, PC, CF)Yes · P1: No
- Number of supported materials13 vs 62.2×
- Weight35 kg vs 55 kg+57%
- Screen size4.3″ vs 3.5″+23%
Why is P1 better than DE?
- Build volume36 L vs 396 L11×
- Build height (Z)300 mm vs 1,100 mm3.7×
- Build depth (Y)300 mm vs 600 mm2×
- Build width (X)400 mm vs 600 mm+50%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 400 mm | 600 mm |
| Build depth (Y) | 300 mm | 600 mm |
| Build height (Z) | 300 mm | 1,100 mm |
| Build volume | 36 L | 396 L |
| Speed | ||
| Max print speed | 200 mm/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 260 °C | — |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | — |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, etc. | PLA, ABS, Wood PLA, Rubber, Flex (TPU), PETG. |
| Number of supported materials | 13 | 6 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | — | No |
| Connectivity & control | ||
| Connectivity | USB | USB, SD card |
| USB | Yes | Yes |
| SD card | — | Yes |
| Screen size | 4.3″ | 3.5″ |
| Touchscreen | Yes | Yes |
| Size & power | ||
| Width | 590 mm | — |
| Depth | 430 mm | — |
| Height | 560 mm | — |
| Weight | 35 kg | 55 kg |
