- scrc.us.com
- Compare
- D600 Pro 2 vs Funmat Pro 310 APOLLO
CreatBot D600 Pro 2 vs INTAMSYS Funmat Pro 310 APOLLO
What D600 Pro 2 does better (5) and where Funmat Pro 310 APOLLO wins (8) — every spec side by side.
vs
4.9Speed5.1
5.9Print quality3.3
6.4Material versatility9.2
9.6Build volume4.5
8.4Ease of use9.0
Dimensions
Size comparison
D600 Pro 2Funmat Pro 310 APOLLO
| D600 Pro 2 | Funmat Pro 310 APOLLO | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 700 mm | +545 mm |
| Width | 1,080 mm | 700 mm | +380 mm |
| Depth | 920 mm | 655 mm | +265 mm |
| Weight | 200 kg | 80 kg | +120 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than Funmat Pro 310 APOLLO?
- Build volume216 L vs 20.6 L10.5×
- Build height (Z)600 mm vs 260 mm2.3×
- Finest layer height0.05 mm vs 0.1 mm2×
- Build depth (Y)600 mm vs 260 mm2.3×
- Build width (X)600 mm vs 305 mm+97%
Why is Funmat Pro 310 APOLLO better than D600 Pro 2?
- Max print speed80 mm/s vs 500 mm/s6.2×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Max bed temperature100 °C vs 160 °C+60%
- Number of supported materials5 vs 377.4×
- Weight200 kg vs 80 kg2.5×
- Max nozzle temperature420 °C vs 450 °C+7%
- EthernetNo · D600 Pro 2: Yes
- Max chamber temperature70 °C vs 100 °C+43%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 305 mm |
| Build depth (Y) | 600 mm | 260 mm |
| Build height (Z) | 600 mm | 260 mm |
| Build volume | 216 L | 20.6 L |
| Speed | ||
| Max print speed | 80 mm/s | 500 mm/s |
| Max acceleration | — | 8,000 mm/s² |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | — | 0.3 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 450 °C |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | PEEK, PEEK-CF, PEEK-GF, PEKK, SP5000, AM200, ABS+, ABS-GF, ABS-HS, ASA, HIPS, PA12-CF, PA6, 66, PA6-CF, PC, PC-ABS, PC-FR, PC-PBT, PET-CF, PETG, PET-GF, PLA, PPA-CF, PPA-GF, PPS, PPS-CF, PPS-GF, PVA, SP3030, SP3050, SP5010, TPU95A, KIMYA ABS-ESD, BASF PC, ABS-FR, WANHUA PA12 |
| Number of supported materials | 5 | 37 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 160 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 70 °C | 100 °C |
| Air filter (carbon / HEPA) | Yes | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 1,080 mm | 700 mm |
| Depth | 920 mm | 655 mm |
| Height | 1,245 mm | 700 mm |
| Weight | 200 kg | 80 kg |
| Rated power | 5,500 W | 1,800 W |
