- scrc.us.com
- Compare
- Sermoon D3 Pro vs Guider 3 Ultra
Creality Sermoon D3 Pro vs Flashforge Guider 3 Ultra
What Sermoon D3 Pro does better (2) and where Guider 3 Ultra wins (7) — every spec side by side.
vs
7.8Speed7.2
3.8Print quality5.9
4.6Material versatility6.1
4.2Build volume8.8
5.2Ease of use9.0
Dimensions
Size comparison
Sermoon D3 ProGuider 3 Ultra
| Sermoon D3 Pro | Guider 3 Ultra | Difference | |
|---|---|---|---|
| Height | 656 mm | 1,070 mm | −414 mm |
| Width | 553 mm | 635 mm | −82 mm |
| Depth | 578 mm | 550 mm | +28 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than Guider 3 Ultra?
- Max print speed300 mm/s vs 250 mm/s+20%
- Number of supported materials7 vs 4+75%
Why is Guider 3 Ultra better than Sermoon D3 Pro?
- Build volume19.1 L vs 65.3 L3.4×
- Build height (Z)300 mm vs 600 mm2×
- Finest layer height0.1 mm vs 0.05 mm2×
- Max nozzle temperature300 °C vs 350 °C+17%
- Screen size4.3″ vs 7″+63%
- Build depth (Y)220 mm vs 330 mm+50%
- Build width (X)290 mm vs 330 mm+14%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 290 mm | 330 mm |
| Build depth (Y) | 220 mm | 330 mm |
| Build height (Z) | 300 mm | 600 mm |
| Build volume | 19.1 L | 65.3 L |
| Speed | ||
| Max print speed | 300 mm/s | 250 mm/s |
| Max acceleration | — | 20,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | 0.35 mm | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | PLA, PETG, ASA, ABS |
| Number of supported materials | 7 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 60 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 635 mm |
| Depth | 578 mm | 550 mm |
| Height | 656 mm | 1,070 mm |
| Weight | 43 kg | — |
| Rated power | 1,300 W | — |
