- scrc.us.com
- Compare
- Sermoon D3 Pro vs Peek-300
Creality Sermoon D3 Pro vs CreatBot Peek-300
What Sermoon D3 Pro does better (4) and where Peek-300 wins (10) — every spec side by side.
vs
7.8Speed3.6
3.8Print quality8.2
4.6Material versatility9.5
4.2Build volume7.4
5.2Ease of use2.6
Dimensions
Size comparison
Sermoon D3 ProPeek-300
| Sermoon D3 Pro | Peek-300 | Difference | |
|---|---|---|---|
| Height | 656 mm | 750 mm | −94 mm |
| Width | 553 mm | 650 mm | −97 mm |
| Depth | 578 mm | 600 mm | −22 mm |
| Weight | 43 kg | 100 kg | −57 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than Peek-300?
- Max print speed300 mm/s vs 150 mm/s2×
- Wi-FiYes · Peek-300: No
- Weight43 kg vs 100 kg2.3×
- EthernetYes · Peek-300: No
Why is Peek-300 better than Sermoon D3 Pro?
- Build volume19.1 L vs 36 L+88%
- Finest layer height0.1 mm vs 0.04 mm2.5×
- Max nozzle temperature300 °C vs 480 °C+60%
- Engineering materials (PA, PC, CF)No · Sermoon D3 Pro: Yes
- Max bed temperature120 °C vs 200 °C+67%
- Number of supported materials7 vs 172.4×
- Build height (Z)300 mm vs 400 mm+33%
- Max chamber temperature60 °C vs 120 °C2×
- Build depth (Y)220 mm vs 300 mm+36%
- Build width (X)290 mm vs 300 mm+3%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Build volume | ||
| Build width (X) | 290 mm | 300 mm |
| Build depth (Y) | 220 mm | 300 mm |
| Build height (Z) | 300 mm | 400 mm |
| Build volume | 19.1 L | 36 L |
| Speed | ||
| Max print speed | 300 mm/s | 150 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.04 mm |
| Thickest layer height | 0.35 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 480 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI (ULTEM), PEEK, CF-PEEK, GF-PEEK, PEKK |
| Number of supported materials | 7 | 17 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 200 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 60 °C | 120 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | USB |
| Wi-Fi | Yes | No |
| Ethernet | Yes | No |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 650 mm |
| Depth | 578 mm | 600 mm |
| Height | 656 mm | 750 mm |
| Weight | 43 kg | 100 kg |
| Rated power | 1,300 W | 4,600 W |
