- scrc.us.com
- Compare
- Sermoon D3 Pro vs D600 Pro 2
Creality Sermoon D3 Pro vs CreatBot D600 Pro 2
What Sermoon D3 Pro does better (5) and where D600 Pro 2 wins (8) — every spec side by side.
vs
7.8Speed4.9
3.8Print quality7.8
4.1Material versatility6.1
4.2Build volume9.6
5.5Ease of use8.6
Dimensions
Size comparison
Sermoon D3 ProD600 Pro 2
| Sermoon D3 Pro | D600 Pro 2 | Difference | |
|---|---|---|---|
| Height | 656 mm | 1,245 mm | −589 mm |
| Width | 553 mm | 1,080 mm | −527 mm |
| Depth | 578 mm | 920 mm | −342 mm |
| Weight | 43 kg | 200 kg | −157 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than D600 Pro 2?
- Max print speed300 mm/s vs 80 mm/s3.8×
- Weight43 kg vs 200 kg4.7×
- EthernetYes · D600 Pro 2: No
- Max bed temperature120 °C vs 100 °C+20%
- Number of supported materials7 vs 5+40%
Why is D600 Pro 2 better than Sermoon D3 Pro?
- Build volume19.1 L vs 216 L11.3×
- Build height (Z)300 mm vs 600 mm2×
- Finest layer height0.1 mm vs 0.05 mm2×
- Max nozzle temperature300 °C vs 420 °C+40%
- Build depth (Y)220 mm vs 600 mm2.7×
- Build width (X)290 mm vs 600 mm2.1×
- Screen size4.3″ vs 7″+63%
- Max chamber temperature60 °C vs 70 °C+17%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 290 mm | 600 mm |
| Build depth (Y) | 220 mm | 600 mm |
| Build height (Z) | 300 mm | 600 mm |
| Build volume | 19.1 L | 216 L |
| Speed | ||
| Max print speed | 300 mm/s | 80 mm/s |
| Max volumetric flow | — | 90 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | 0.35 mm | — |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 420 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | ASA, ABS, PLA, PET, PETG |
| Number of supported materials | 7 | 5 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 100 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 60 °C | 70 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | No |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 1,080 mm |
| Depth | 578 mm | 920 mm |
| Height | 656 mm | 1,245 mm |
| Weight | 43 kg | 200 kg |
| Rated power | 1,300 W | 5,500 W |
