- scrc.us.com
- Compare
- K2 SE vs Q1 Pro
Creality K2 SE vs QIDI Q1 Pro
What K2 SE does better (2) and where Q1 Pro wins (9) — every spec side by side.
Dimensions
Size comparison
K2 SEQ1 Pro
| K2 SE | Q1 Pro | Difference | |
|---|---|---|---|
| Height | 482 mm | 489 mm | −7 mm |
| Width | 355 mm | 477 mm | −122 mm |
| Depth | 355 mm | 467 mm | −112 mm |
| Weight | 10.6 kg | 17 kg | −6.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is K2 SE better than Q1 Pro?
- Build height (Z)245 mm vs 240 mm+2%
- Weight10.6 kg vs 17 kg+61%
Why is Q1 Pro better than K2 SE?
- Build volume11.6 L vs 14.4 L+24%
- Engineering materials (PA, PC, CF)No · K2 SE: Yes
- Max print speed500 mm/s vs 600 mm/s+20%
- Max nozzle temperature300 °C vs 350 °C+17%
- Number of supported materials3 vs 113.7×
- Max bed temperature100 °C vs 120 °C+20%
- Build depth (Y)215 mm vs 245 mm+14%
- Build width (X)220 mm vs 245 mm+11%
- Screen size4″ vs 4.3″+8%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 220 mm | 245 mm |
| Build depth (Y) | 215 mm | 245 mm |
| Build height (Z) | 245 mm | 240 mm |
| Build volume | 11.6 L | 14.4 L |
| Speed | ||
| Max print speed | 500 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.35 mm | — |
| Vibration compensation (input shaping) | Yes | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | — |
| Nozzle material | hardened steel | hardened steel |
| Toolheads | 1 | — |
| Nozzles | 1 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Filament cutter | — | Yes |
| Supported materials | TPU, PETG, PLA | PLA, ABS, ASA, PETG, TPU, PVA, HIPS, PC, PA, Carbon, etc. |
| Number of supported materials | 3 | 11 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 4 | — |
| Multi-colour system | CFS | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | No | — |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | — | 60 °C |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB, NFC | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | Yes | — |
| Bluetooth | No | — |
| NFC (filament / setup) | Yes | — |
| App control | Yes | — |
| Screen size | 4″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 355 mm | 477 mm |
| Depth | 355 mm | 467 mm |
| Height | 482 mm | 489 mm |
| Weight | 10.6 kg | 17 kg |
| Rated power | 350 W | 350 W |
