- scrc.us.com
- Compare
- CR-200B vs M1
Creality CR-200B vs Geeetech M1
What CR-200B does better (5) and where M1 wins (2) — every spec side by side.
Dimensions
Size comparison
CR-200BM1
| CR-200B | M1 | Difference | |
|---|---|---|---|
| Height | 503 mm | 298 mm | +205 mm |
| Width | 411 mm | 279 mm | +132 mm |
| Depth | 435 mm | 200 mm | +235 mm |
| Weight | 16 kg | 3 kg | +13 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-200B better than M1?
- Build volume8 L vs 1.1 L7.3×
- Build height (Z)200 mm vs 110 mm+82%
- Build width (X)200 mm vs 100 mm2×
- Build depth (Y)200 mm vs 100 mm2×
- TouchscreenYes · M1: No
Why is M1 better than CR-200B?
- Max print speed180 mm/s vs 250 mm/s+39%
- Weight16 kg vs 3 kg5.3×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Bed-slinger (i3-style) |
| Build volume | ||
| Build width (X) | 200 mm | 100 mm |
| Build depth (Y) | 200 mm | 100 mm |
| Build height (Z) | 200 mm | 110 mm |
| Build volume | 8 L | 1.1 L |
| Speed | ||
| Max print speed | 180 mm/s | 250 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.2 mm |
| Extruder & hotend | ||
| Direct-drive extruder | — | Yes |
| Default nozzle | — | 0.4 mm |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PLA | — |
| Number of supported materials | 2 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 60 °C |
| Connectivity & control | ||
| Connectivity | — | USB, SD card |
| USB | — | Yes |
| SD card | — | Yes |
| Touchscreen | Yes | No |
| Size & power | ||
| Width | 411 mm | 279 mm |
| Depth | 435 mm | 200 mm |
| Height | 503 mm | 298 mm |
| Weight | 16 kg | 3 kg |
| Rated power | 360 W | — |
