- scrc.us.com
- Compare
- CR-10 SE vs Neptune 4 Plus
Creality CR-10 SE vs Elegoo Neptune 4 Plus
What CR-10 SE does better (4) and where Neptune 4 Plus wins (4) — every spec side by side.
vs
9.5Speed7.5
4.0Material versatility4.9
4.9Build volume9.4
Dimensions
Size comparison
CR-10 SENeptune 4 Plus
| CR-10 SE | Neptune 4 Plus | Difference | |
|---|---|---|---|
| Height | 625 mm | 640 mm | −15 mm |
| Width | 490 mm | 578 mm | −88 mm |
| Depth | 470 mm | 533 mm | −63 mm |
| Weight | 12 kg | 14.4 kg | −2.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-10 SE better than Neptune 4 Plus?
- Max print speed600 mm/s vs 500 mm/s+20%
- Max bed temperature110 °C vs 100 °C+10%
- Number of supported materials6 vs 4+50%
- Weight12 kg vs 14.4 kg+20%
Why is Neptune 4 Plus better than CR-10 SE?
- Build volume12.8 L vs 39.4 L3.1×
- Build height (Z)265 mm vs 385 mm+45%
- Build width (X)220 mm vs 320 mm+45%
- Build depth (Y)220 mm vs 320 mm+45%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Bed-slinger (i3-style) |
| Delivered as | — | Partially assembled |
| All-metal frame | — | Yes |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 220 mm | 320 mm |
| Build depth (Y) | 220 mm | 320 mm |
| Build height (Z) | 265 mm | 385 mm |
| Build volume | 12.8 L | 39.4 L |
| Speed | ||
| Max print speed | 600 mm/s | 500 mm/s |
| Max acceleration | — | 12,000 mm/s² |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.3 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | — | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, ASA, PETG, PLA, TPU, Wood | ABS, PETG, PLA, TPU |
| Number of supported materials | 6 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | No | — |
| Actively heated chamber | — | No |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, USB, SD card |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| SD card | No | Yes |
| Bluetooth | No | No |
| Screen size | — | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | No |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 490 mm | 578 mm |
| Depth | 470 mm | 533 mm |
| Height | 625 mm | 640 mm |
| Weight | 12 kg | 14.4 kg |
| Rated power | 350 W | — |
