- scrc.us.com
- Compare
- V0.2 vs V2.4
Voron V0.2 vs Voron V2.4
What V0.2 does better (0) and where V2.4 wins (4) — every spec side by side.
Why is V0.2 better than V2.4?
V0.2 has no measurable advantages in this pair.
Why is V2.4 better than V0.2?
- Build volume1.7 L vs 15.6 L9.2×
- Build height (Z)120 mm vs 250 mm2.1×
- Build width (X)120 mm vs 250 mm2.1×
- Build depth (Y)120 mm vs 250 mm2.1×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | Kit | Kit |
| All-metal frame | Yes | Yes |
| Klipper firmware | Yes | Yes |
| Open-source design | Yes | Yes |
| Build volume | ||
| Build width (X) | 120 mm | 250 mm |
| Build depth (Y) | 120 mm | 250 mm |
| Build height (Z) | 120 mm | 250 mm |
| Build volume | 1.7 L | 15.6 L |
| Speed | ||
| Max print speed | 250 mm/s | 250 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.1 mm |
| Thickest layer height | 0.4 mm | 0.4 mm |
| Extruder & hotend | ||
| Direct-drive extruder | Yes | Yes |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB, SD card |
| Wi-Fi | — | No |
| Ethernet | — | No |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Bluetooth | — | No |
| Touchscreen | Yes | Yes |
| Features | ||
| Silent stepper drivers | Yes | Yes |
