- scrc.us.com
- Compare
- MD-600D vs Plus 4
Mingda MD-600D vs QIDI Plus 4
What MD-600D does better (6) and where Plus 4 wins (5) — every spec side by side.
Dimensions
Size comparison
MD-600DPlus 4
| MD-600D | Plus 4 | Difference | |
|---|---|---|---|
| Height | 1,265 mm | 550 mm | +715 mm |
| Width | 1,325 mm | 505 mm | +820 mm |
| Depth | 965 mm | 487 mm | +478 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is MD-600D better than Plus 4?
- Build volume216 L vs 26 L8.3×
- Build height (Z)600 mm vs 280 mm2.1×
- Nozzles2 vs 12×
- Screen size10″ vs 5″2×
- Build width (X)600 mm vs 305 mm+97%
- Build depth (Y)600 mm vs 305 mm+97%
Why is Plus 4 better than MD-600D?
- Max print speed300 mm/s vs 600 mm/s2×
- Max acceleration10,000 mm/s² vs 20,000 mm/s²2×
- Max nozzle temperature350 °C vs 370 °C+6%
- Max bed temperature110 °C vs 120 °C+9%
- Number of supported materials7 vs 8+14%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 600 mm | 305 mm |
| Build depth (Y) | 600 mm | 305 mm |
| Build height (Z) | 600 mm | 280 mm |
| Build volume | 216 L | 26 L |
| Speed | ||
| Max print speed | 300 mm/s | 600 mm/s |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² |
| Max volumetric flow | 40 mm³/s | — |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.4 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 370 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.8 |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | 2 | 1 |
| Filament diameter | — | 1.75 mm |
| Filament cutter | — | Yes |
| Supported materials | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA | ABS, ASA, Carbon, PA, PC, PETG, PLA, TPU |
| Number of supported materials | 7 | 8 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 120 °C |
| Flexible magnetic build plate | — | Yes |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | — | Yes |
| Max chamber temperature | — | 65 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | — | Yes |
| USB | — | Yes |
| Screen size | 10″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Camera resolution | — | 2.1 MP |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 1,325 mm | 505 mm |
| Depth | 965 mm | 487 mm |
| Height | 1,265 mm | 550 mm |
| Weight | — | 27 kg |
| Rated power | 2,400 W | 450 W |
